Stockport · England

Bath re-enamelling & resurfacing in Gatley, Stockport

Bath re-enamelling for Gatley, without a refit. Get a fixed price from your pictures, then we come to you.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Gatley

Gatley and nearby

Gatley is about 1 mile east of Wythenshawe, in Stockport. Wherever you are in the SK8 postcode area, we carry out the work at your property. Our technicians cover all 42 towns and villages in Stockport. Our jobs stretch from Gatley to Manchester (6 miles away).

Jobs in SK8 and M22 work the same way as everywhere else we cover. From Church Road, Elm Road and Oakwood Avenue or anywhere nearby, a technician can come to you. With the A560 and B5166 close by, Gatley is simple for us to get to. We also travel to Peel Hall (1 mile south-west), Cheadle (1 mile east), Benchill (1 mile west), Wythenshawe (1 mile west) and Heald Green (2 miles south). Larger places within reach include Stockport (3 miles east), Burnage (3 miles north), Hazel Grove (5 miles east), Bramhall (3 miles south-east), Reddish (5 miles north-east) and Marple (7 miles east).

What’s near Gatley

We visit homes around Lady Barn House School, The Kingsway School and Wythenshawe Park. Other local landmarks include Gatley Primary School (within half a mile south-west), Crown Inn (0.8 miles east) and Church of St James (under half a mile west). Gatley has its own railway station: Gatley station. Well-known places in the area include Stockport Etchells (0.5 miles west) and Fletcher Moss Art Gallery & Museum (1.9 miles north). The countryside around Gatley includes Lindow Common and Unicorn Grocery.

Map of Gatley © OpenStreetMap contributors

How we handle bath re-enamelling in Gatley

Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Typical jobs include a dull, rough surface that won’t come clean and chips and rust in more than one place, across Victorian roll-tops, pressed steel baths and cast iron baths.

Whatever the size of the job, you get the same one-year guarantee.

Location
Gatley (SK8, M22)
Region
Stockport
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Keep a parking space free if you can
  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access

Getting a price

Most clients in Gatley get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed quote

Read more

Keeping it looking good

After the repair has cured, a few habits help it last:

  • A dripping tap should be fixed promptly
  • Have chips seen to early
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

What affects the price in Gatley

Prices start from £350. We price every job individually. What matters most is:

  • What kind of damage it is
  • Whether we combine several jobs
  • How much damage there is
  • Unusual colours or finishes

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed price

You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:

  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • Any details about the material
  • A coin or ruler next to the damage for scale

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

FAQs for Gatley

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can you fix a peeling bath coating?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Gatley.

Do you cover Gatley?

Yes. We work across the UK and travel to Gatley and the rest of Stockport. Send us pictures for a fixed quote, or call 0345 017 0787.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you need bath re-enamelling in Gatley?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Most people get in touch when they notice one of these:

  • Enamel that is lost its shine and feels rough
  • A coloured bath you want in white
  • Brown or grey marks that don’t clean off
  • Several chips and rust patches

Before you book anyone

  • Whether a trained technician does the job
  • How long it needs to cure
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended

How to compare quotes

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

When a repair isn’t the answer

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)
  • A bath that’s rusted through

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Landlords, agents and businesses in Gatley

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.