Sheffield · England
Bath Re-enamelling in Geerlane
Bath re-enamelling in Geerlane without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Thin, worn enamel in places

Bath re-enamelling in Geerlane without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s lots of chips and rust spots and thin, worn enamel in places, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Geerlane (S12)
- Area hub
- Sheffield
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026

What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Leave the bath for the full curing time before using it
- Do not let dyes or oils sit on the finish
- Have chips seen to early
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Covering Geerlane
Geerlane is about 2 miles south-west of Hackenthorpe, in Sheffield. Across the S12 area, a technician comes to you. We cover all 118 towns and villages across Sheffield. Our nearest city page is Leeds, about 34 miles away.
Jobs in S12 are booked in the same way as anywhere else. We also travel to Birleyhay (1 mile east), Troway (1 mile south), Summerley (1 mile south-west), Apperknowle (2 miles south-west) and Lightwood (2 miles north-west). Larger places within reach include Sheffield (4 miles north-west), Netherthorpe (6 miles north-west), Upperthorpe (6 miles north-west), West End (5 miles north-west), Walkley (6 miles north-west) and Broomhall (5 miles north-west).
Landmarks near Geerlane
We visit homes around Eckington School, Ridgeway Methodist Chapel and Marsh Lane Primary School, among other places. The closest station to Geerlane is Dronfield station, about 2.7 miles south-west of the centre. Well-known places in the area include Dronfield Urban District (2.6 miles south-west) and Handsworth St Marys Museum (3.8 miles north).
Questions from Geerlane
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you cover the entire of Sheffield?
Across the UK. Our prices are the same everywhere.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we would advise against a repair
We will not take on work that will not last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Landlord and trade work in Geerlane
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When to call us in Geerlane
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
Send us a photo if you notice any of these:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Several chips and rust patches
- A coloured bath you want in white
Before booking anyone
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
- What happens if they find more damage
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Let us know about parking or access
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Towns and villages near Geerlane
Also in Geerlane
Repairing versus replacing in Geerlane
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
What you get with us
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- Work done at your home or business
- Dust sheets down, tidy finish
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.

