Devon · England
Bath Re-enamelling for George Nympton homes
Bath re-enamelling for George Nympton, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
Bath re-enamelling at your home in George Nympton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with worn patches where water runs and sits and enamel that’s lost its shine and feels rough, we can typically put it right, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
Every repair is covered by a one-year guarantee, wherever you are in Devon.
- Where
- George Nympton (EX36, EX37)
- County
- Devon
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in George Nympton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What we are called out for in George Nympton
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
People normally call us when they notice one of these:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Before you book anyone
- When it can be used again
- What preparation is included
- What protection goes down before work starts
- Whether there are any call-out or travel charges
Nearby places to George Nympton
Other services in George Nympton
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Where we work around George Nympton
George Nympton is about 10 miles south-east of Newport, in Devon. Wherever you are in the EX36 postcode area, a technician comes to you. George Nympton is one of 586 places in Devon where we work.
Our repair technicians cover all of the EX36 and EX37 postcode area and the streets around it. Other places close to George Nympton include Alswear (2 miles east), South Molton (2 miles north), Kings Nympton (2 miles south), Chittlehamholt (3 miles west) and Bishop's Nympton (4 miles east). We also work in nearby towns such as Barnstaple (11 miles north-west), Newport (10 miles north-west), Roundswell (11 miles north-west), East-the-Water (15 miles west), Pilton (11 miles north-west) and Great Torrington (13 miles west).
Landmarks near George Nympton
In George Nympton, that means homes near Church of St George, Castle Inn and South Molton Community College. The closest station to George Nympton is Kings Nympton station, roughly 4.5 miles south-west. A little further out are South Molton Hospital (1.8 miles north).
What affects the price in George Nympton
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether we combine several jobs
- The size and number of damaged areas
- How hard the colour is to match
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
You can generally get a fixed price without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- Any details about the material
- Whether it’s been repaired or coated before
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- Generally one visit, start to finish
- Honest advice, even when it means no job
Take a look at our full price list and guide to resurfacing and replacement costs.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
George Nympton questions
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Do you cover the entire of Devon?
We cover the whole UK, including George Nympton and the rest of Devon. Send your postcode with your pictures and we’ll offer you dates.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
How do I book?
Use the quote form or ring 0345 017 0787.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Let the surface dry out before the visit
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
