Glasgow · Scotland
Bath re-enamelling & resurfacing in Germiston, Glasgow
Fixed-price bath re-enamelling in Germiston and the surrounding area, usually in one visit.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling in Germiston, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Whether it’s an outdated colour you’d like to change and a bath that stays dull however much you clean it, we can usually put it right.
Every job is backed for twelve months in Germiston and everywhere else. If something goes wrong with the work, we come back.
- Location
- Germiston (G21, G31, G33)
- County
- Glasgow
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Also near Germiston
Also in Germiston
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The colour and finish to match
- How easy the damage is to reach
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- Something in shot to show the size
- The material, if you know it
- Details of any past repairs
Send us pictures of the damage and a wider shot of the whole item, with your G21 postcode, and we will come back with a fixed quote.
Do you need bath re-enamelling in Germiston?
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
You may need us if you’ve spotted any of these:
- An old resurfacing that is failing
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
What to look for in a quote
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- How soon you can use it again
- What aftercare is recommended
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
Germiston: your questions answered
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Which areas do you work in?
We work UK-wide, so Germiston is covered. Prices do not change with location.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
How do I get a price for bath re-enamelling in Germiston?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first, so mention it when you send photos.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Straight answers about what a repair can do
- Fixed prices from your pictures
Read our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Germiston and the surrounding area
Germiston is about 2 miles north-east of Calton, in Glasgow. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We cover all 183 towns and villages in Glasgow.
Our visits in G21, G31 and G33 are booked in the same way as anywhere else. Whether you live on Royston Road, Blochairn Road and Petershill Road or a nearby road, a technician can come to you. If you’re just outside Germiston, we cover Blochairn (1 mile south-west), Old Balornock (1 mile south-west), Provanmill (1 mile east), Barmulloch (1 mile north) and Royston (1 mile west). Larger places within reach include Glasgow (3 miles south-west), Hillhead (3 miles west), Dowanhill (3 miles west), Woodlands (3 miles west), North Kelvinside (3 miles west) and Partickhill (4 miles west).
Landmarks near Germiston
Around Germiston, we work in homes near Glasgow, St. Roch's Secondary School and Andersonian Library, among other places. You’ll also find Springburn Park (1.3 miles north-west) and Our Lady of Good Counsel Church (0.8 miles south-west). For rail, the closest station is Barnhill station, roughly 0.6 miles north-west of the centre. Well-known places in the area include Canniesburn Hospital (1 mile south-west) and Bishop's Castle (1.2 miles south-west). Open spaces near Germiston include Lenzie Moss and Hogganfield Loch.
About our accreditations · Every repair comes with a one-year guarantee.
