South Ayrshire · Scotland
Bath Re-enamelling for Girvan homes
Our technicians come to Girvan for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
Bath re-enamelling in Girvan without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with a peeling or bubbling previous coating and chips and rust in more than one place, we can generally put it right, on Victorian roll-tops, cast iron baths and acrylic baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Girvan (KA26)
- Region
- South Ayrshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material and finish
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Natural light rather than flash
- A close-up of the damage, in focus
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Common problems we fix in Girvan
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- Thin, worn enamel in places
What your quote should include
- What prep work is covered
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- How the room is protected while they work
FAQs for Girvan
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you come to Girvan?
We do. Repair technicians travel to Girvan from across the region, with no extra charge for travel.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover the entire of South Ayrshire?
Across the UK, so Girvan is covered. Prices do not change with location.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- One visit for most repairs
- A year’s guarantee on all work
Take a look at our prices page or bath cost comparison.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Our work in Girvan
Girvan is about 17 miles south-west of Ayr, in South Ayrshire. From the centre of Girvan to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 52 towns and villages across South Ayrshire. Our jobs stretch from Girvan to Glasgow (48 miles away).
Every address in KA26 is covered. From Victory Park Road, North Park Avenue and Wesley Place or anywhere nearby, a technician can come to you. Main roads around Girvan include the A77 and A714, so getting to you is simple. If you’re just outside Girvan, we cover Old Dailly (3 miles north-east), Turnberry (5 miles north), Dailly (6 miles north-east), Barr (6 miles east) and Lendalfoot (6 miles south-west). Girvan is among the bigger towns we cover in South Ayrshire.
What’s near Girvan
We visit homes around Methodist Church and Halls, Harbour Bar and Girvan Academy and the streets around them. For rail, the closest station is Girvan station, roughly 0.5 miles north. A little further out are Girvan Community Hospital (0.6 miles north) and Camregan Castle (1.8 miles north-east). Not far away are Dow Hill.
Places near Girvan
More services for Girvan
Landlord and trade work in Girvan
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
