Swansea · Wales
Bath re-enamelling & resurfacing in Glais, Swansea
Full bath re-enamelling and resurfacing at your home in Glais, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
FAQs for Glais
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you work in Glais?
Yes. We cover the entire UK and come to Glais and the rest of Swansea. Send us pictures for a fixed quote, or call 0345 017 0787.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Bath re-enamelling in Glais without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Common call-outs are for thin, worn enamel in places and brown or grey marks that don’t clean off, on acrylic baths, basins & shower trays and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Glais (SA7)
- Region
- Swansea
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Glais
Other services in Glais
When to call us in Glais
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
The things clients typically mention when they call include:
- Stains that will not shift
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
What to look for in a quote
- How the room is protected while they work
- How to look after the finish
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. What matters most is:
- Whether we combine several jobs
- How hard the colour is to match
- Where the damage is and how we get to it
- How many areas need work
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
Send us a photo of the damage and one of the whole item, with your SA7 postcode, and we’ll come back with a fixed quote.
Keeping it looking good
To keep it looking its best for years:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs right away
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Glais and nearby
Glais is about 3 miles north-west of Neath, in Swansea. From the centre of Glais to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Glais is one of 153 towns and villages in Swansea where we work.
All of SA7 is covered, from the main roads to the quietest streets. That includes homes on Station Road, Birchgrove Road and Clos y Fran and the roads around them. Neighbouring places we cover include Aberclydach (1 mile west), Clydach (1 mile north-west), Birchgrove (1 mile south), Heol-las (1 mile south) and Tre-gof (2 miles south-west). Within a short drive, we also cover Swansea (5 miles south-west), Castle (5 miles south-west), Morriston (3 miles south-west), Mount Pleasant (6 miles south-west), Gorseinon (7 miles west) and Dyfaty (5 miles south-west).
What’s near Glais
Typical jobs here are in homes near The Globe Inn, Glais Primary School and Church of Saint John the Baptist. Glais’s nearest station is Llansamlet station, roughly 2 miles south of the centre. Further afield, we also cover the area around Mound (1.3 miles east) and Welsh Museum of Fire (2.2 miles south-east). The countryside around Glais includes Pluck Lake and Cwm Clydach RSPB Reserve.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Send us photos and we’ll tell you honestly before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
