Northumberland · England
Bath Re-enamelling in Glanton
Bath re-enamelling across Glanton and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
Repairing versus replacing in Glanton
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Why book with us
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
Bath re-enamelling in Glanton without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair acrylic baths, cast iron baths and Victorian roll-tops, and people most often call us about a coating lifting around the plughole and thin, worn enamel in places.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Glanton (NE66)
- Area hub
- Northumberland
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Glanton
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Towns and villages near Glanton
Also in Glanton
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Make sure the room can be ventilated
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
Ask for a price
Send us a photo of the damage and one of the entire item, and tell us you are in Glanton, and we’ll come back with a fixed quote.
Read more
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Glanton. The price depends on:
- The colour and finish to match
- How easy the damage is to reach
- What the surface is made of
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Two or three clear pictures are normally enough. It helps if you send:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Glanton
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Glanton and nearby
Glanton is about 20 miles north-west of Morpeth, in Northumberland. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in all 189 towns and villages in Northumberland, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 32 miles away.
Every address in NE66 is within our area. We regularly work on streets such as Front Street and West Turnpike and the roads around them. Neighbouring places we cover include Powburn (1 mile north), Whittingham (2 miles south), Eglingham (4 miles north-east), Roddam (5 miles north-west) and Netherton (7 miles south-west). We also work in nearby towns such as Alnwick (7 miles east), Amble (14 miles south-east), Rothbury (8 miles south), Wooler (10 miles north-west), Seahouses (14 miles north-east) and Belford (12 miles north).
Around Glanton
Around Glanton, we work in homes near Roman Catholic Church of St Mary and Attached Presbytery and Queens Head pub and the streets around them. Other landmarks nearby include Breamish Valley Archaeology Exhibition (3.5 miles west) and Edlingham Castle (4.4 miles south-east). Open spaces near Glanton include Titlington Pike and Kimmer Lough.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
