Northumberland · England
Bath Re-enamelling for Amble homes
Full bath re-enamelling and resurfacing at your home in Amble, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Bath re-enamelling in Amble without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Our repair technicians work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people contact us are a peeling or bubbling previous coating and lots of chips and rust spots.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Amble (NE65)
- Area hub
- Northumberland
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Tell us if there are stairs or a lift
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
Repair or replace in Amble?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- One-year guarantee on every repair
- Colour mixed on the day to match
- Normally one visit, start to finish
- No need to remove anything
Take a look at our prices page or bath cost comparison.
Amble and nearby
Amble is about 11 miles north of Ashington, in Northumberland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Amble is one of 189 places in Northumberland we cover. You can also see our page for Newcastle upon Tyne, about 24 miles away.
Every address in NE65 is within our area, from the main roads to the quietest streets. Whether you live on High Street, Northumbria Terrace and King Edward Street or anywhere nearby, a technician can come to you. Main roads around Amble include the A1068 and B6345, which makes travel easy. Other places close to Amble include High Hauxley (1 mile south-east), Warkworth (1 mile north-west), Low Hauxley (2 miles south-east), Birling (2 miles north-west) and Togston (2 miles south-west). Larger places within reach include Blyth (15 miles south), Ashington (11 miles south), Morpeth (12 miles south), Bedlington (14 miles south), Alnwick (7 miles north-west) and Newbiggin-by-the-Sea (10 miles south).
Local landmarks in Amble
Our clients here include homes close to Amble First School, James Calvert Spence College and Church of St Cuthbert and the streets around them. The nearest railway station is Acklington station, about 3.2 miles south-west of the centre. Other landmarks nearby include Warkworth Castle (1.5 miles north-west) and Amble Urban District (within half a mile north-west). The countryside around Amble includes Coquet Island.
Nearby places to Amble
More services for Amble
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Your questions about bath re-enamelling in Amble
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Do you work in Amble?
Yes. We cover the whole UK and come to Amble and the rest of Northumberland. Send pictures and we’ll quote, or call 0345 017 0787.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What affects the price in Amble
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- How hard the colour is to match
- How many areas need work
- The type of damage
- What the surface is made of
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Your postcode, so we can check dates
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Do you need bath re-enamelling in Amble?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Common reasons people in Amble contact us include:
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Comparing quotes
- What happens if they find more damage
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- What prep work is covered
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Amble
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
