Milton Keynes · England
Bath re-enamelling & resurfacing in Glebe Farm, Milton Keynes
Our technicians come to Glebe Farm for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Bath re-enamelling in Glebe Farm, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. Whether it’s a bath that stays dull however much you clean it and lots of chips and rust spots, we can help, whatever the material.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Glebe Farm (MK17, MK7, MK10)
- Area hub
- Milton Keynes
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs immediately
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We take into account:
- What the surface is made of
- Unusual colours or finishes
- Whether we combine several jobs
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Glebe Farm, and we’ll reply with a fixed price.
Glebe Farm: your questions answered
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Other services in Glebe Farm
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Covering Glebe Farm
Glebe Farm is about 4 miles north-east of Bletchley, in Milton Keynes. Customers in Glebe Farm get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Glebe Farm is one of 73 places in Milton Keynes where we work. You can also see our page for London, about 44 miles away.
Our visits in MK17, MK7 and MK10 are booked in the same way as anywhere else. Whether you live on Garner Lane, Walton Road and Newport Road or anywhere nearby, we can come to you. Close by, we cover Wavendon (1 mile south), Kingston (1 mile north-west), Lower End (1 mile east), Woburn Sands (1 mile south-east) and Salford (2 miles north-east). Within a short drive, we also cover Milton Keynes (4 miles west), Bletchley (4 miles south-west), Newport Pagnell (4 miles north-west), Bletchley and Fenny Stratford (4 miles south-west), Furzton (4 miles south-west) and Whitehouse (6 miles west).
Around Glebe Farm
We visit homes around Walton High, Church of St Mary and St Mary's Wavendon CofE Primary. For rail, the closest station is Woburn Sands station, about 1.2 miles south-east. Well-known places in the area include Rugemont Castle (3.5 miles east) and Milton Keynes University Hospital (2.9 miles west). Green spaces nearby include Blue Lagoon Park and Caldecotte Lake.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Do you need bath re-enamelling in Glebe Farm?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
People generally call us when they notice one of these:
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
What your quote should include
- What protection goes down before work starts
- Whether a trained technician does the job
- A fixed price, and whether VAT is included
- What happens if they find more damage
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why Glebe Farm customers choose us
- One visit for most repairs
- No extra charge for your area
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
