North Ayrshire · Scotland
Bath re-enamelling & resurfacing in Glengarnock, North Ayrshire
Our technicians come to Glengarnock for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
Bath re-enamelling at your home in Glengarnock
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you’re dealing with a bath in a colour that no longer suits and several chips and rust patches, we can help, on Victorian roll-tops, basins & shower trays and pressed steel baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Glengarnock (KA14, KA25)
- Area hub
- North Ayrshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Glengarnock
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Most people contact us after spotting one of these:
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- Lots of chips and rust spots
- Thin, worn enamel in places
Questions to ask before you book
- What prep work is covered
- Aftercare advice
- Who will actually do the work
- If travel is included in the price
How the visit works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
What affects the price in Glengarnock
Prices start from £350. We don’t charge extra for travel to Glengarnock. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Whether we combine several jobs
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- Any details about the material
- One picture of the entire bath
- Whether it’s been repaired or coated before
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Repairing versus replacing in Glengarnock
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Generally one visit, start to finish
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- We leave the room as we found it
Take a look at our full price list or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Glengarnock
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Glengarnock
More services for Glengarnock
Our work in Glengarnock
Glengarnock is about 6 miles north of Kilwinning, in North Ayrshire. Wherever you are in the KA14 postcode area, a technician comes to you. Our technicians cover all 53 towns and villages across North Ayrshire, from the larger towns to small villages. Our nearest city page is Glasgow, about 18 miles away.
Postcode districts we cover here: KA14 and KA25. Streets in the area include Garnockside, Main Road and Holms Road, all of which we cover. We also cover the places around Glengarnock: Meikle Auchengree (1 mile south-east), Longbar (1 mile east), Kilbirnie (1 mile north-west), Beith (2 miles east) and Gateside (3 miles east). Further out, we also cover Irvine (8 miles south), Kilwinning (6 miles south), Saltcoats (8 miles south-west), Largs (8 miles north-west), Ardrossan (8 miles south-west) and Stevenston (7 miles south).
What’s near Glengarnock
Around Glengarnock, we work in homes near Geilsland House, Orr's Trust Public Park and Kilbirnie Auld Kirk and the streets around them. Glengarnock has its own railway station: Glengarnock station. Well-known places in the area include Barony and Castle of Kilbirnie (1.2 miles north-west). Not far away are Kilbirnie Loch.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Repair dripping taps early
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Questions from Glengarnock
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
About our accreditations · Every repair comes with a one-year guarantee.
