Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Glyncoch, Rhondda Cynon Taff
Bath re-enamelling in and around Glyncoch: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Chips and rust in more than one place
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Bath re-enamelling in Glyncoch, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with an outdated colour you’d like to change and several chips and rust patches, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Glyncoch (CF37)
- Region
- Rhondda Cynon Taff
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Aftercare is simple:
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- The material
- The size and number of damaged areas
- The type of damage
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- A photo taken from further back
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Common questions in Glyncoch
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Do you work in Glyncoch?
Yes, we do. We send a technician to Glyncoch for every job, and the price is the same as everywhere else.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes the best part of a day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Ask for a price
Upload a photo of the damage and a wider shot of the whole item, with your CF37 postcode, and we will come back with a fixed quote.
Advice
Repair or replace in Glyncoch?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Glyncoch
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Get in touch if you’ve noticed:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
What your quote should include
- Aftercare advice
- How your room will be protected
- What happens if they find more damage
- Who will actually do the work
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About Glyncoch
Glyncoch is about 2 miles north of Pontypridd, in Rhondda Cynon Taff. Wherever you are in the CF37 postcode area, a technician comes to you. Glyncoch is one of 133 places in Rhondda Cynon Taff we cover.
Postcode districts we cover here: CF37. From Cefn Lane, Garth Avenue and Ynysybwl Road or a nearby road, a technician can come to you. We also cover the places around Glyncoch: Coed-y-cwm (1 mile north-east), Pontsionnorton (1 mile south-east), Trallwn (1 mile south-east), Graigwen (1 mile south) and Cilfynydd (1 mile east). We also work in nearby towns such as Aberdare (8 miles north-west), Mountain Ash (4 miles north), Tonypandy (5 miles west), Rhondda (6 miles west), Porth (3 miles west) and Church Village (4 miles south).
Local landmarks in Glyncoch
Typical jobs here are in homes near Ynysangharad Park, Cefn Primary School and Pontypridd High School and the streets around them. Glyncoch’s nearest station is Abercynon station, about 1.5 miles north of the centre. Well-known places in the area include University of South Wales Art Collection Museum (2.4 miles south) and Twyn Castell (4.9 miles north-east). For a walk, there is Coed Craig-yr-hesg.
Also near Glyncoch
Also in Glyncoch
About our accreditations · Every repair comes with a one-year guarantee.
