East Sussex · England
Bath re-enamelling & resurfacing in Glyndebourne, East Sussex
Fixed-price bath re-enamelling in Glyndebourne and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
Bath re-enamelling at your home in Glyndebourne
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include lots of chips and rust spots and a dull, rough surface that won’t come clean, across pressed steel baths, Victorian roll-tops and cast iron baths.
Big or small, it’s backed by a one-year guarantee.
- Area
- Glyndebourne (BN8)
- Area hub
- East Sussex
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Glyndebourne
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It typically takes the best part of a day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
What we’re called out for in Glyndebourne
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- A dull, rough surface that will not come clean
- Wear marks under the taps
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
What to look for in a quote
- How to care for the finish
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- What preparation is included
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What affects the price in Glyndebourne
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material and finish
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- One picture of the whole bath
- A coin beside the damage so we can judge size
- What it’s made of, if you know
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Repair or replace in Glyndebourne?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Glyndebourne customers choose us
- We come to you, anywhere in the UK
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- No need to remove anything
Read our prices page or guide to resurfacing and replacement costs.
Glyndebourne and the surrounding area
Glyndebourne is about 3 miles east of Lewes, in East Sussex. Clients in Glyndebourne get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Glyndebourne is one of 289 towns and villages in East Sussex we cover. We work right across the region, from Glyndebourne to London (about 44 miles away).
Our visits in BN8 work the same way as everywhere else we cover. Neighbouring places we cover include Glynde (1 mile south), Ashton Green (1 mile north-east), Ringmer (1 mile north), Cliffe (2 miles west) and Firle (2 miles south-east). Further out, we also cover Eastbourne (12 miles south-east), Seaford (7 miles south), Lewes (3 miles west), Hailsham (8 miles east), Crowborough (13 miles north) and Uckfield (7 miles north).
Landmarks near Glyndebourne
Typical jobs here are in homes near Ringmer Primary and Nursery School, St Mary's Church and Science and Technology Policy Research and the streets around them. The nearest railway station is Glynde station, about 1.2 miles south of the centre. Well-known places in the area include Lewes Castle (2.5 miles west) and Museum of Agricultural Bygones (1.7 miles north-east). Not far away are Southerham Farm and Cliffe Hill.
- Other local spots include South Malling Without (1.1 miles west)
Places near Glyndebourne
Also in Glyndebourne
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
We work for landlords, letting agents and housing providers in Glyndebourne as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
