Conwy · Wales
Bath re-enamelling & resurfacing in Gogarth, Conwy
Full bath re-enamelling and resurfacing in Gogarth, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Bath re-enamelling in Gogarth without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. If you are dealing with thin, worn enamel in places and lots of chips and rust spots, we can typically put it right, on cast iron baths, Victorian roll-tops and pressed steel baths alike.
All of our repairs are guaranteed for twelve months in Gogarth and everywhere else. If something goes wrong with the work, we come back.
- Location
- Gogarth (LL30)
- Region
- Conwy
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Signs you need bath re-enamelling in Gogarth
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted any of these:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What to look for in a quote
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
- Aftercare advice
- Whether a trained technician does the job
What happens on the day
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Gogarth questions
What areas do you cover?
We work UK-wide, so Gogarth is covered. Prices do not change with location.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How much does bath re-enamelling cost in Gogarth?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Towns and villages near Gogarth
Also in Gogarth
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- Access to the area
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Details of any past repairs
- What it’s made of, if you know
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Our work in Gogarth
Gogarth is about 1 mile north-west of Llandudno, in Conwy. We visit clients in Gogarth, so there’s no workshop to go to. We work in 75 places across Conwy. Our jobs stretch from Gogarth to Liverpool (about 39 miles away).
Our visits in LL30 are booked in the same way as anywhere else. You will find streets such as Marine Drive and Llys Helig Drive, all of which we cover. We also cover the places around Gogarth: Cwlach (1 mile east), Llandudno (1 mile south-east), Craig-y-Don (2 miles east), Deganwy (2 miles south-east) and Llanrhos (3 miles south-east). Larger places within reach include Bae Colwyn (6 miles south-east), Old Colwyn (7 miles east), Colwyn Bay (7 miles east), Abergele (12 miles east), Colwyn Bay (6 miles south-east) and Conwy (3 miles south-east).
What’s near Gogarth
Our clients here include homes close to Church of St Tudno, Randolph Turpins pub and Llandudno Collegiate School. Gogarth’s nearest station is Llandudno station, about 1.5 miles south-east. Other landmarks nearby include Llandudno Museum (1.2 miles east) and Mostyn (1.3 miles south-east). The countryside around Gogarth includes Bodlondeb Woods and Great Orme.
Looking after it afterwards
Looking after the surface is easy:
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
