Vale of Glamorgan · Wales

Bath re-enamelling & resurfacing in Graig Penllyn, Vale of Glamorgan

Local bath re-enamelling for Graig Penllyn: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Graig Penllyn

Landlords, agents and businesses in Graig Penllyn

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

How we handle bath re-enamelling in Graig Penllyn

Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. If you are dealing with staining under the taps and around the waste and worn patches where water runs and sits, we can usually put it right, on acrylic baths, basins & shower trays and cast iron baths alike.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.

Area
Graig Penllyn (CF71)
County
Vale of Glamorgan
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Honest limits

To be straight with you, some problems need a different fix:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • An acrylic bath that flexes badly underfoot

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Different materials, different repairs

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

How to look after the repair

A little care keeps the finish looking good. We recommend:

  • Don’t leave a chip unrepaired
  • Clean with a soft cloth and mild detergent
  • Keep toiletries on a shelf rather than in the bath
  • Do not use the bath until it has fully cured

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

The process

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Have a window or extractor fan available
  • Point us to the nearest place to park

Getting a price

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a fixed price

Related advice

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

What you get with us

  • CHAS and Constructionline accredited
  • We will tell you if it’s not worth repairing
  • Dust sheets down, tidy finish
  • Nothing taken out or refitted

See our pricing or resurfacing vs replacement cost guide.

Our work in Graig Penllyn

Graig Penllyn is about 5 miles east of Bridgend, in the Vale of Glamorgan. Customers in Graig Penllyn get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover 67 places across the Vale of Glamorgan.

All of CF71 is within our area. Nearby, we also work in Llansanwyr (1 mile east), West Village (2 miles south), Cowbridge (2 miles south-east), Llysworney (2 miles south-west) and Ystradowen (2 miles east). Further out, we also cover Barry (10 miles south-east), Penarth (13 miles east), Gibbonsdown (10 miles south-east), Cadoxton (11 miles south-east), Dinas Powys (12 miles east) and Llantwit Major (5 miles south).

Landmarks near Graig Penllyn

Our customers here include homes close to Llangan C.P. School, Barley Mow pub and Cowbridge Comprehensive School, among other places. The closest station to Graig Penllyn is Pencoed station, roughly 2.8 miles north-west of the centre. Well-known places in the area include Cowbridge and District Museum (2.1 miles south-east) and Princess of Wales Hospital (4.7 miles north-west). Green spaces nearby include Nant Dyfrgi Pool and Penllyn.

  • Parks and local facilities nearby include Llandow/Ewenny (2.7 miles south-west)
Map of Graig Penllyn © OpenStreetMap contributors

What affects the price in Graig Penllyn

Prices start from £350. Every quote is fixed and free. What we look at:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • How much damage there is

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • The material, if you know it
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

FAQs for Graig Penllyn

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Will there be fumes?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

Can you change the colour of my bath?

Yes, most people go for white. Mention the colour you want when you send photos.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.