Essex · England
Bath Re-enamelling in Great Canfield
Bath re-enamelling in and around Great Canfield: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it

Bath re-enamelling in Great Canfield, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. We’re frequently asked to fix an outdated colour you’d like to change and a dull, rough surface that won’t come clean, on Victorian roll-tops, pressed steel baths and basins & shower trays.
Big or small, you get the same one-year guarantee in Great Canfield and across Essex.
- Area
- Great Canfield (CM6)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Great Canfield clients choose us
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
Take a look at our full price list and bath cost comparison.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Towns and villages near Great Canfield
Other services in Great Canfield
Great Canfield: your questions answered
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you do the outside of a roll-top?
Yes. Inside and out.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Our work in Great Canfield
Great Canfield is about 3 miles south-west of Great Dunmow, in Essex. We visit clients in Great Canfield and the surrounding area, so there’s no workshop to go to. Great Canfield is one of 644 towns and villages in Essex we cover. We work right across the region, from Great Canfield to London (about 29 miles away).
Our technicians cover all of CM6. From The Street and Canfield Road or a nearby road, a technician can come to you. If you’re just outside Great Canfield, we cover High Roding (1 mile east), Roundbush Green (2 miles south), Keeres Green (2 miles south), High Easter (2 miles south-east) and Stagden Cross (3 miles south-east). Within a short drive, we also cover Chelmsford (10 miles south-east), Braintree (11 miles east), Harlow (10 miles south-west), Brentwood (14 miles south), Billericay (15 miles south) and Witham (14 miles east).
What’s near Great Canfield
We visit homes around The Black Lion Public House and Parish Church of St Mary and the streets around them. The nearest railway station is Stansted Airport station, roughly 4.5 miles north-west. Well-known places in the area include Little Easton Moat (3.8 miles north). Open spaces near Great Canfield include Portingbury Hills.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The material and finish
- How many items we do on one visit
- How easy the damage is to reach
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
How to get a fixed price
You can normally get a fixed price without us visiting. To make it quick:
- What it’s made of, if you know
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Natural light rather than flash
To get a price, send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
When to call us in Great Canfield
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Common reasons people in Great Canfield contact us are:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Several chips and rust patches
Questions to ask before you book
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.

