Cambridgeshire · England

Bath Re-enamelling in Great Chishill

Bath re-enamelling across Great Chishill and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • Several chips and rust patches
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Great Chishill

FAQs for Great Chishill

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

What areas do you cover?

The whole UK, including all of Cambridgeshire. Send your postcode with your pictures and we’ll offer you dates.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

What happens after I send photos?

We review the pictures and send a fixed quote with dates.

How long does re-enamelling take?

One day for most baths, ready the following day. We give you timings with the quote.

How we handle bath re-enamelling in Great Chishill

If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s wear marks under the taps and a period or roll-top bath worth keeping, we can help.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Before and after: an old basin refinished to bright white
Where
Great Chishill (SG8)
Area hub
Cambridgeshire
Warranty
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

What we’re called out for in Great Chishill

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Contact us if you’ve noticed any of these:

  • Thin, worn enamel in places
  • A peeling or bubbling previous coating
  • Enamel that’s lost its shine and feels rough
  • An original cast iron bath that needs restoring

What your quote should include

  • What preparation is included
  • How long it needs to cure
  • How the colour is matched
  • How changes to the job are handled

10 questions to ask before booking

About Great Chishill

Great Chishill is about 4 miles east of Royston, in Cambridgeshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Great Chishill is one of 371 places in Cambridgeshire we cover. Our jobs stretch from Great Chishill to London (37 miles away).

All of SG8 is covered, from the main roads to the quietest streets. Streets in the area include Colts Croft, Hall Lane and May Street, and we cover them all. Close by, we cover Shaftenhoe End (1 mile south-west), Building End (1 mile south-east), Heydon (1 mile north-east), North Hertfordshire (1 mile west) and Barley (2 miles west). Within a short drive, we also cover Cambridge (13 miles north), Royston (4 miles west), Cambourne (14 miles north-west), King's Hedges (14 miles north), Arbury (14 miles north) and Chesterton (13 miles north).

Around Great Chishill

We visit homes around Parish Church of St Swithun. The nearest railway station is Royston station, roughly 4.7 miles west of the centre. A little further out are The Warren (2.7 miles south). Open spaces near Great Chishill include Fowlmere RSPB reserve.

Map of Great Chishill © OpenStreetMap contributors

What your bath is made of matters

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

When a repair is not the answer

We won’t take on work that won’t last, so these are the limits:

  • Plumbing leaks, which need a plumber
  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Great Chishill

  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Do not leave bottles, razors or sponges standing on the surface
  • A quick wipe after use keeps limescale away
  • Stick to gentle, non-abrasive cleaners
  • Respect the curing time we give you

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

How we price bath re-enamelling

Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:

  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • How many items we do on one visit
  • The material and finish

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Quotes from your pictures

You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:

  • One sharp close-up of the damage
  • A wider photo showing the entire bath
  • Natural light rather than flash
  • Your postcode, so we can check dates

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

How the visit works

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes a full day, and we’ll keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Let the surface dry out before the visit
  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area

How to get a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.