East Riding of Yorkshire · England

Bath re-enamelling & resurfacing in Great Hatfield, East Riding of Yorkshire

Damaged bath in Great Hatfield? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Great Hatfield homes

Bath re-enamelling in Great Hatfield without replacing anything

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Whether it’s a dull, rough surface that won’t come clean and a coating lifting around the plughole, we can help.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Stained basin resurfaced to clean white (before and after)
Where
Great Hatfield (HU11)
County
East Riding of Yorkshire
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Great Hatfield

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

It’s worth getting a quote if you see:

  • Worn patches where water runs and sits
  • An outdated colour you’d like to change
  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating

What to look for in a quote

  • How long it needs to cure
  • What the guarantee covers, and for how long
  • How the colour is matched
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Should you replace it?

If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Why us?

  • Colour-matched on site
  • Fixed prices from your photos
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK

See our prices page or resurfacing vs replacement cost guide.

Great Hatfield questions

What areas do you cover?

Across the UK. Prices do not change with location.

Will the new finish last?

Look after it and it lasts. Gentle cleaning, no suction mats.

Do you cover Great Hatfield?

Yes. We cover the whole UK and travel to Great Hatfield and the rest of East Riding of Yorkshire. Send pictures and we will quote, or call 0345 017 0787.

Is there a call-out fee?

There is no separate call-out charge. Your fixed price includes everything.

How long does re-enamelling take?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • An acrylic bath that flexes badly underfoot
  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What we do, step by step

Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s usually ready the day after.

Before we arrive

  • Let the surface dry out before the visit
  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible

Ask for a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.

Get a free quote

Related advice

Prices and what affects them

Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:

  • How easy the damage is to reach
  • How many items we do on one visit
  • What kind of damage it is
  • The material and finish

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Great Hatfield and the surrounding area

Great Hatfield is about 10 miles north-east of Kingston upon Hull, in East Riding of Yorkshire. We visit homes and businesses in Great Hatfield and the surrounding area, so you do not need to take anything anywhere. We cover all 299 towns and villages across East Riding of Yorkshire. You can also see our page for Leeds, about 55 miles away.

All of HU11 is within our area. From Main Street, Cross Street and Mappleton Road or a nearby road, we can come to you. We also travel to Withernwick (2 miles south), Mappleton (2 miles east), Great Cowden (3 miles east), West Newton (3 miles south) and Tansterne (4 miles south-east). Larger places within reach include Beverley (10 miles west), Bridlington (15 miles north), Driffield (14 miles north-west), Hessle (14 miles south-west), Cottingham (11 miles south-west) and Hornsea (3 miles north).

Landmarks near Great Hatfield

Typical jobs here are in homes near Church of St Giles. Other landmarks nearby include Hornsea Cottage Hospital (3.3 miles north) and Aldbrough Castle (4 miles south-east). Not far away are Hornsea Mere.

Map of Great Hatfield © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.