East Riding of Yorkshire · England
Bath Re-enamelling in Hornsea
Problem with your bath in Hornsea? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
About our bath re-enamelling in Hornsea
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and people most often call us about a coating lifting around the plughole and an outdated colour you’d like to change.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Hornsea (HU18)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Hornsea, we will quote for several properties at once. Send photos for each one and we will price them together.
Common problems we fix in Hornsea
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Customers generally contact us about:
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
Comparing quotes
- Aftercare advice
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Point us to the nearest place to park
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Where we work around Hornsea
Hornsea is about 12 miles north-east of Beverley, in East Riding of Yorkshire. Our repair technicians come to customers in Hornsea and nearby villages, so you do not need to take anything anywhere. Hornsea is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Hornsea to Leeds (57 miles away).
Here we cover the HU18 postcode area. Local streets include Market Place, Newbegin and Willows Drive. Hornsea sits on or near the A1035 and B1242, so getting to you is simple. Nearby, we also work in Wassand (2 miles south-west), Atwick (2 miles north), Seaton (3 miles west), Mappleton (3 miles south-east) and Bewholme (3 miles north-west). Further out, we also cover Beverley (12 miles south-west), Bridlington (13 miles north), Driffield (13 miles north-west), Cottingham (14 miles south-west), Hedon (12 miles south) and Willerby (15 miles south-west). Hornsea is one of the larger places we cover in East Riding of Yorkshire.
Near you in Hornsea
We visit homes around Church of Saint Nicholas, Hornsea Community Primary School and Hornsea School and Language College, among other places. A little further out are Hornsea Cottage Hospital (less than half a mile north). Open spaces near Hornsea include Hornsea Mere.
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Hornsea. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- What the surface is made of
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- One picture of the whole bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
Most customers in Hornsea get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Other services in Hornsea
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Your questions about bath re-enamelling in Hornsea
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens once I’ve sent pictures?
You will get a fixed quote back, usually with dates to choose from. You are under no obligation.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs immediately
- Respect the curing time we give you
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
