Norfolk · England

Bath Re-enamelling in Great Snoring

Full bath re-enamelling and resurfacing for homes and businesses in Great Snoring and across Norfolk. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Great Snoring?

Looking after it afterwards

To keep it looking its best for years:

  • A quick wipe after use keeps limescale away
  • Keep suction mats out of the bath
  • Repair dripping taps early
  • Have chips seen to early

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

Bath re-enamelling in Great Snoring, done in place

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with an old resurfacing that’s failing and wear marks under the taps, we can typically put it right, whatever the material.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Technician in a mask working on a freestanding roll-top bath
Area
Great Snoring (NR21)
County
Norfolk
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Should you replace it?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • CHAS and Constructionline accredited
  • A year’s guarantee on all work

Read our prices page and resurfacing vs replacement cost guide.

When we’d advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • A metal bath with a through crack
  • A bath that is rusted through
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly.

What we work on

  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

The process

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s generally ready the next day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Get a free quote

Advice

Prices and what affects them

Prices start from £350. There is no area surcharge for Great Snoring. The price reflects:

  • What kind of damage it is
  • The colour and finish to match
  • The material
  • The size and number of damaged areas

Our prices are the same across the UK, so there’s no premium for Great Snoring. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed price

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • What it’s made of, if you know
  • Whether it’s been repaired or coated before
  • Something in shot to show the size
  • A picture taken from further back

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

Great Snoring and the surrounding area

Great Snoring is about 14 miles north of Dereham, in Norfolk. Jobs in Great Snoring are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover all 797 towns and villages in Norfolk.

Jobs in NR21 are booked in the same way as anywhere else. Jobs here include addresses on The Street, Dilldash Lane and Little Snoring Road. We also cover the places around Great Snoring: Houghton St Giles (2 miles west), Little Walsingham (2 miles north-west), Great Walsingham (2 miles north), East Barsham (2 miles west) and North Barsham (2 miles west). Within a short drive, we also cover Dereham (14 miles south), Sheringham (14 miles east), Fakenham (3 miles south-west), Holt (9 miles east), Wells-next-the-Sea (6 miles north) and Toftwood (15 miles south).

Local landmarks in Great Snoring

We visit homes around Church of St Mary and the streets around them. Other landmarks nearby include Museum of the Blessed Virgin Mary (1.6 miles north-west). Green spaces nearby include Thursford Wood.

Map of Great Snoring © OpenStreetMap contributors

FAQs for Great Snoring

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

Can you price it without visiting?

Nearly always. If photos do not show enough, we will ask for another angle.

Do you work in Great Snoring?

Yes. We cover the entire UK and travel to Great Snoring and the rest of Norfolk. Send photos and we will quote, or call 0345 017 0787.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders across Norfolk.

Can you resurface a pink bath in white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Can a failed resurfacing be redone?

In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

How much does bath re-enamelling cost in Great Snoring?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Landlords, agents and businesses in Great Snoring

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.