Bristol · England
Bath re-enamelling & resurfacing in Greenbank, Bristol
Full bath re-enamelling and resurfacing in Greenbank, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- Thin, worn enamel in places
Bath re-enamelling at your home in Greenbank
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are several chips and rust patches and a roll-top that’s seen better days.
All of our repairs are guaranteed for twelve months in Greenbank and everywhere else. If something goes wrong with the work, we come back.
- Area
- Greenbank (BS5, BS2, BS16)
- Region
- Bristol
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Greenbank questions
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Greenbank.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
What affects the price in Greenbank
Prices start from £350. Every quote is fixed and free. What we take into account:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The size and number of damaged areas
- The material
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say straight away whether it can be repaired.
Signs you need bath re-enamelling in Greenbank
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people contact us when they notice one of these:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- Several chips and rust patches
- A peeling or bubbling previous coating
What your quote should include
- What preparation is included
- How long it needs to cure
- Whether they match the colour on site
- How changes to the job are handled
Covering Greenbank
Greenbank is about 2 miles east of Bristol, in Bristol. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Greenbank is one of 89 places in Bristol where we work. You can also see our page for Birmingham, about 75 miles away.
Postcode districts we cover here: BS5, BS2 and BS16. Local streets include York Road, Shaw Road and Roman Road, all of which we cover. Main roads around Greenbank include the M32 and A432, so getting to you is simple. Neighbouring places we cover include Lower Easton (1 mile west), Whitehall (1 mile south), Eastville (1 mile north), Redfield (1 mile south) and Upper Easton (1 mile south-west). We also work in nearby towns such as Bedminster (3 miles south-west), The Chessels (3 miles south-west), Ashton Gate (3 miles south-west), Clifton (3 miles west), Hartcliffe (4 miles south-west) and Staple Hill (3 miles east).
What’s near Greenbank
We visit homes around The City Academy Bristol, Whitehall Primary School and Black Swan Public House, among other places. You’ll also find St George Park (0.6 miles south-east) and St Anne's Church (less than half a mile north). Greenbank has its own railway station: Stapleton Road station. Well-known places in the area include Bristol Castle (1.6 miles south-west) and Glenside Hospital Museum (1.3 miles north-east). Not far away are Purdown and Tarn Lake.
- Local facilities include Barton Regis Rural District (within half a mile north)
Also near Greenbank
Also in Greenbank
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Greenbank as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Related advice
Keeping it looking good
Looking after the surface is easy:
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
