Dudley · England
Bath Re-enamelling in Greensforge
Bath re-enamelling for Greensforge, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- An old resurfacing that is failing
- Enamel that’s lost its shine and feels rough
How we handle bath re-enamelling in Greensforge
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the next day. We’re often asked to fix stains that won’t shift and enamel that’s lost its shine and feels rough, in pressed steel baths, Victorian roll-tops and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Greensforge (DY6)
- County
- Dudley
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Greensforge
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Greensforge customers choose us
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
See our prices page and resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlord and trade work in Greensforge
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Greensforge, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Questions from Greensforge
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens after I send photos?
You’ll get a fixed quote back, normally with dates to choose from. You’re under no obligation.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your DY6 postcode.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Our work in Greensforge
Greensforge is about 2 miles west of Kingswinford, in Dudley. Anywhere in DY6, a technician comes to you. We work in 63 places across Dudley, from the larger towns to small villages. Our nearest city page is Birmingham, about 13 miles away.
We cover every part of the DY6 postcode area and the streets around it. We also cover the places around Greensforge: Ashwood (1 mile south), Lawns Wood (1 mile south-east), Kingswinford (2 miles east), Ridge Hill (2 miles south-east) and Bromley (2 miles east). Larger places within reach include Dudley (5 miles east), Halesowen (7 miles south-east), Stourbridge (4 miles south-east), Sedgley (4 miles north-east), Brierley Hill (4 miles south-east) and Milking Bank (4 miles east).
Local landmarks in Greensforge
In Greensforge, that means homes near The Hinksford Arms, Summerhill School and Summerhill School. Also close by are Church of Ascension (1 mile north-east) and Church of the Ascension CofE Primary School (1 mile east). The nearest railway station is Stourbridge Town station, roughly 3.9 miles south-east. Well-known places in the area include Wordsley Hospital (1.9 miles south-east) and Stourton Castle (2.6 miles south). For a walk, there’s Kinver Edge and Stourton Pit.
Towns and villages near Greensforge
Other services in Greensforge
Aftercare tips
To keep it looking its best for years:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Store bottles off the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How the visit works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know about parking or access
- Keep a parking space free if you can
- Let us know if it has been repaired before
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Greensforge. What changes the price is:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from photos
Two or three clear pictures are normally enough. Try to include:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A coin or ruler next to the damage for scale
If you are in Greensforge and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Common problems we fix in Greensforge
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted any of these:
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- Chips and rust in more than one place
What to look for in a quote
- Who will actually do the work
- What protection goes down before work starts
- What the guarantee covers, and for how long
- If travel is included in the price
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
