Staffordshire · England
Bath re-enamelling & resurfacing in Stourton, Staffordshire
Damaged bath in Stourton? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
Bath re-enamelling in Stourton, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are chips and rust in more than one place and enamel that’s lost its shine and feels rough.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Stourton (DY7)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. These habits help:
- Repair dripping taps early
- Never use suction bath mats
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Towns and villages near Stourton
What else we do in Stourton
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Where we work around Stourton
Stourton is about 3 miles west of Stourbridge, in Staffordshire. Wherever you are in the DY7 postcode area, we carry out the work at your property. Stourton is one of 512 places in Staffordshire we cover. Our jobs stretch from Stourton to Birmingham (about 13 miles away).
Every address in DY7 is within our area. Whether you live on Stourton Crescent, Beechlawn Drive and Wolverhampton Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include New Wood (1 mile east), Lawns Wood (1 mile north-east), Wollaston (1 mile east), Amblecote (2 miles east) and Ashwood (2 miles north). Larger places within reach include Wombourne (5 miles north), Codsall (11 miles north), Cheslyn Hay (15 miles north-east), Brewood (15 miles north), Bilbrook (11 miles north) and Landywood (15 miles north-east).
Local landmarks in Stourton
Typical jobs here are in homes near Ridgewood High School and the streets around them. The nearest railway station is Stourbridge Town station, roughly 2.5 miles east of the centre. A little further out are Merry Hill Shopping Centre (3.9 miles east) and Stourton Castle (under half a mile west). Green spaces nearby include Kinver Edge and Stourton Pit.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day, tidy-up included.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Ensure the area is dry
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
Do you need bath re-enamelling in Stourton?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
People normally call us when they notice one of these:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Wear marks under the taps
- A dull, rough surface that will not come clean
Before booking anyone
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- How the colour is matched
- Whether cleaning and preparation are in the price
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Honest advice, even when it means no job
- No extra charge for your area
- A year’s guarantee on all work
- Colour mixed on the day to match
Read our prices page or guide to resurfacing and replacement costs.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
For anyone letting property in or around Stourton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Your questions about bath re-enamelling in Stourton
Do you cover Stourton?
Yes. We cover the entire UK and travel to Stourton and the rest of Staffordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
