Dudley · England

Bath Repair in Greensforge

Our repair technicians come to Greensforge for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Greensforge

Bath repair at your home in Greensforge

A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. Whether it’s chips on the rim or sides and deep scratches in acrylic, we can help, on cast iron enamel, pressed steel enamel and roll-top & freestanding alike.

All of our repairs are guaranteed for twelve months in Greensforge and everywhere else. If something goes wrong with the work, we come back.

Location
Greensforge (DY6)
Region
Dudley
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Get any new chip repaired before it rusts
  • A dripping tap stains enamel, so fix it early
  • Protect the bath with a towel when doing jobs nearby

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

Honest limits

We will not take on work that will not last, so here’s what a repair can’t put right:

  • A steel bath rusted through
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Greensforge questions

What happens next?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders in Greensforge.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

How do I book?

Use the quote form or ring 0345 017 0787.

Is the work guaranteed?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Prices and what affects them

Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:

  • How much damage there is
  • The material
  • The type of damage
  • Access to the area

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.

Send photos for a quote

We price nearly every job from pictures. This is what to send:

  • Natural light rather than flash
  • Any details about the material
  • Something in shot to show the size
  • One picture of the entire bath

To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.

Landlords, agents and businesses in Greensforge

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Greensforge as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a few hours, depending on the damage in most cases. The room is left tidy and you will know when it can be used.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Point us to the nearest place to park
  • Make sure the area is dry
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Most customers in Greensforge get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

Repairs by material

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why us?

  • Free fixed quotes from pictures
  • Same prices wherever you are
  • One visit for most repairs
  • Everything repaired in place

Read our pricing or guide to resurfacing and replacement costs.

Our work in Greensforge

Greensforge is about 2 miles west of Kingswinford, in Dudley. Our technicians come to clients in Greensforge and the surrounding area, so nothing has to leave your home. We cover all 63 towns and villages in Dudley. Our jobs stretch from Greensforge to Birmingham (13 miles away).

Our repair technicians cover all of DY6 and the streets around it. Other places close to Greensforge include Ashwood (1 mile south), Lawns Wood (1 mile south-east), Kingswinford (2 miles east), Ridge Hill (2 miles south-east) and Bromley (2 miles east). Larger places within reach include Dudley (5 miles east), Halesowen (7 miles south-east), Stourbridge (4 miles south-east), Sedgley (4 miles north-east), Brierley Hill (4 miles south-east) and Milking Bank (4 miles east).

Landmarks near Greensforge

Typical jobs here are in homes near The Hinksford Arms, Summerhill School and Summerhill School, among other places. Other local landmarks include Church of Ascension (1 mile north-east) and Church of the Ascension CofE Primary School (1 mile east). The nearest railway station is Stourbridge Town station, about 3.9 miles south-east of the centre. Further afield, we also cover the area around Wordsley Hospital (1.9 miles south-east) and Stourton Castle (2.6 miles south). Green spaces nearby include Kinver Edge and Stourton Pit.

Map of Greensforge © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.