Gloucestershire · England
Bath re-enamelling & resurfacing in Greet, Gloucestershire
Full bath re-enamelling and resurfacing in Greet, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An outdated colour you’d like to change
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Never use suction bath mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Bath re-enamelling at your home in Greet
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on basins & shower trays, acrylic baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and wear marks under the taps.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Greet (GL54)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Greet
Greet is about 4 miles east of Bishop's Cleeve, in Gloucestershire. Across the GL54 area, we carry out the work at your property. Our technicians cover all 470 towns and villages in Gloucestershire. Our jobs stretch from Greet to Birmingham (about 35 miles away).
All of GL54 is within our area. Whether you live on Market Lane, The Pines and The Halt Close or a nearby road, we can come to you. Neighbouring places we cover include Winchcombe (1 mile south), Gretton (1 mile west), Hailes (1 mile east), Toddington (2 miles north) and Alderton (3 miles north-west). Larger places within reach include Cheltenham (7 miles south-west), Gloucester (14 miles south-west), Tewkesbury (8 miles west), St Paul's (7 miles south-west), Lansdown (7 miles south-west) and Bishop's Cleeve (4 miles west).
Around Greet
Locally, our jobs take us to homes close to Harvest Home pub, Winchcombe School and Winchcombe Abbey Church of England Primary School. Other landmarks nearby include Winchcombe Museum (1 mile south) and Pebworth Rural District (1.8 miles north-east). The countryside around Greet includes Nottingham Hill and Beckford Nature Reserve.
Greet questions
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Greet.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you cover Greet?
Yes. We cover the entire UK and come to Greet. Send pictures and we’ll quote, or call 0345 017 0787.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Signs you need bath re-enamelling in Greet
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- An old resurfacing that’s failing
- An outdated colour you’d like to change
- Worn patches where water runs and sits
What to look for in a quote
- Aftercare advice
- How changes to the job are handled
- Whether they match the colour on site
- Whether there are any call-out or travel charges
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- What the surface is made of
- Any earlier repairs that need removing first
- How much damage there is
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Quotes from your pictures
Two or three clear photos are usually enough. Try to include:
- A coin beside the damage so we can judge size
- Any details about the material
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
How it works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Getting a price
Most customers in Greet get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Repair or replace in Greet?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Work done at your home or business
- No extra charge for your area
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
Read our pricing and bath cost comparison.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
For landlords and businesses
Landlords, letting agents and housing providers in Greet use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
More services for Greet
About our accreditations · Every repair comes with a one-year guarantee.
