Wrexham · Wales
Bath re-enamelling & resurfacing in Gresford, Wrexham
Full bath re-enamelling and resurfacing in Gresford, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
About our bath re-enamelling in Gresford
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s thin, worn enamel in places and brown or grey marks that don’t clean off, we can help, on Victorian roll-tops, pressed steel baths and basins & shower trays alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Gresford (LL12)
- Region
- Wrexham
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Gresford
Gresford is about 3 miles north of Wrexham, in Wrexham. Whether you are in the middle of Gresford or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Gresford is one of 115 places in Wrexham where we work. We work right across the region, from Gresford to Liverpool (about 22 miles away).
Our visits in LL12 are booked in the same way as anywhere else. You’ll find streets such as High Street, Farriers Walk and Hayfield Drive. Close by, we cover Llay (1 mile west), Pandy (2 miles south-west), Borras (2 miles south), Little Acton (2 miles south-west) and Acton (2 miles south). Larger places within reach include Wrexham (3 miles south), Caia Park (3 miles south), Offa (4 miles south-west), Rhosllannerchrugog (6 miles south-west), Rhosddu (3 miles south-west) and The Dunks (3 miles south).
Landmarks near Gresford
We visit homes around All Saints' Church, The Red Lion pub and The Rofft C.P. School. For rail, the closest station is Gwersyllt station, roughly 2.5 miles south-west. A little further out are Football Museum of Wales and Wrexham Museum (3.2 miles south-west) and Tŷ Pawb (3.1 miles south). For a walk, there’s Wilderness Tip (Gresford) and The Flash.
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Do you need bath re-enamelling in Gresford?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Clients usually contact us about:
- An old resurfacing that is failing
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Several chips and rust patches
Comparing quotes
- What prep work is covered
- Who will actually do the work
- How soon you can use it again
- How the colour is matched
Honest limits
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Your questions about bath re-enamelling in Gresford
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Landlords, agents and businesses in Gresford
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Gresford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Gresford. The price reflects:
- Access to the area
- Previous DIY repairs that have to come out
- The material
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- Details of any past repairs
- Where you are, by postcode
- Natural light rather than flash
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Towns and villages near Gresford
What else we do in Gresford
About our accreditations · Every repair comes with a one-year guarantee.
