Warwickshire · England
Bath Re-enamelling for Griff homes
Bath re-enamelling for Griff, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Griff
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the day after. If you’re dealing with worn patches where water runs and sits and several chips and rust patches, we can help, on basins & shower trays, cast iron baths and pressed steel baths alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Griff (CV10)
- Area hub
- Warwickshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We work cleanly and quietly. We protect the area first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Have a window or extractor fan available
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
Landlord and trade work in Griff
Landlords, letting agents and housing providers in Griff use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Places near Griff
Other services in Griff
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Our work in Griff
Griff is about 1 mile north of Bedworth, in Warwickshire. Whether you’re in the middle of Griff or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Griff is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Griff to Birmingham (about 18 miles away).
Postcode districts we cover here: CV10. If you are just outside Griff, we cover Marston Jabbett (1 mile east), Bedworth Woodlands (1 mile south-west), Bedworth (1 mile south), Exhall (2 miles south) and Bulkington (2 miles south-east). We also work in nearby towns such as Rugby (13 miles south-east), Warwick (15 miles south), Royal Leamington Spa (14 miles south), Leamington Spa (14 miles south), Kenilworth (11 miles south) and Fordbridge (12 miles west).
Landmarks near Griff
Locally, our jobs take us to homes close to Old Meeting United Reformed Church, Race Leys Junior School and The George Eliot School and the streets around them. You’ll also find Nicholas Chamberlaine School (1.2 miles south-east) and Old Royal Oak pub (less than half a mile south). For rail, the closest station is Bermuda Park station, about 0.6 miles north. A little further out are Hartshill Castle (4.1 miles north-west) and George Eliot Hospital Museum (1.2 miles north).
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
- A bath that’s rusted through
Send us photos and we’ll tell you honestly.
Materials we work on in Griff
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How many items we do on one visit
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Two or three clear pictures are generally enough. Try to include:
- The postcode, so we can plan the visit
- One picture of the whole bath
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Send us a picture of the damage and one of the entire item, with your CV10 postcode, and we’ll come back with a fixed quote.
What we are called out for in Griff
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- Thin, worn enamel in places
- A coloured bath you want in white
- A coating lifting around the plughole
- Chips and rust in more than one place
What to look for in a quote
- Whether cleaning and preparation are in the price
- If travel is included in the price
- How to look after the finish
- Whether the price is fixed and includes VAT
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs right away
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Griff
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
About our accreditations · Every repair comes with a one-year guarantee.
