Gloucestershire · England
Bath re-enamelling & resurfacing in Guiting Power, Gloucestershire
Our technicians come to Guiting Power for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
How we handle bath re-enamelling in Guiting Power
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with a period or roll-top bath worth keeping and a bath in a colour that no longer suits, we can help.
All our work comes with our one-year guarantee, wherever you are in Gloucestershire.
- Location
- Guiting Power (GL54)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Guiting Power
More services for Guiting Power
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- Most jobs done in one visit
See our full price list and bath cost comparison.
About Guiting Power
Guiting Power is about 9 miles east of Bishop's Cleeve, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We cover 470 places across Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 38 miles away.
Our visits in GL54 are booked in the same way as anywhere else. We regularly work on streets such as Church Road, Well Lane and Piccadilly and the roads around them. Other places close to Guiting Power include Barton (1 mile north), Naunton (2 miles south-east), Hailes (4 miles north-west), Lower Slaughter (5 miles east) and Lower Swell (5 miles east). Larger places within reach include Cheltenham (10 miles west), Tewkesbury (13 miles west), St Paul's (9 miles west), Cirencester (15 miles south), Lansdown (9 miles west) and Bishop's Cleeve (9 miles west).
Landmarks near Guiting Power
Typical jobs here are in homes near St Michael's and All Angels Church and the streets around them. Well-known places in the area include Moore Cottage Hospital (5.2 miles south-east) and Sudeley Castle (4.3 miles north-west).
Landlord and trade work in Guiting Power
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
When we would advise against a repair
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Materials we work on in Guiting Power
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Do you need bath re-enamelling in Guiting Power?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Clients typically contact us about:
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- An outdated colour you’d like to change
- Lots of chips and rust spots
Comparing quotes
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- What preparation is included
- Aftercare advice
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- How many areas need work
- What the surface is made of
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A picture taken from further back
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How to care for the repair
To keep it looking its best for years:
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Guiting Power: your questions answered
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens if you find more damage?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you work in Guiting Power?
Yes, we do. Technicians travel to Guiting Power from across the region, with no extra charge for travel.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Are there extra charges for Guiting Power?
Travel is included in the price, with the same prices everywhere we work.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How the visit works
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes the best part of a day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
How to prepare
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Point us to the nearest place to park
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
