Gloucestershire · England
Bath re-enamelling & resurfacing in Barton, Gloucestershire
Problem with your bath in Barton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day in most cases. We leave the room clean.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Make sure the area is dry
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Ask for a price
Send us a picture of the damage and a wider shot of the whole item, and tell us you’re in Barton, and we will come back with a fixed quote.
Related advice
Bath re-enamelling in Barton, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and common reasons people contact us are an outdated colour you’d like to change and enamel that’s lost its shine and feels rough.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Barton (GL54)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Barton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Wear marks under the taps
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
Questions to ask before booking
- What prep work is covered
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Barton. The price comes down to:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The material and finish
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Whether it’s been repaired or coated before
- One picture of the entire bath
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Nearby places to Barton
More services for Barton
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Barton customers choose us
- We leave the room as we found it
- Every repair guaranteed for a year
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
Read our prices page and guide to resurfacing and replacement costs.
Barton and the surrounding area
Barton is about 9 miles east of Bishop's Cleeve, in Gloucestershire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 470 towns and villages in Gloucestershire, from the larger towns to small villages. We work right across the region, from Barton to Birmingham (38 miles away).
Our technicians cover all of the GL54 postcode area. That includes homes on Well Lane, Church Road and Piccadilly and the roads around them. We also cover the places around Barton: Guiting Power (1 mile south), Naunton (2 miles south-east), Hailes (4 miles north-west), Lower Slaughter (5 miles east) and Lower Swell (5 miles east). We also work in nearby towns such as Cheltenham (10 miles west), Tewkesbury (13 miles west), St Paul's (9 miles west), Cirencester (15 miles south), Lansdown (9 miles west) and Bishop's Cleeve (9 miles west).
Around Barton
In Barton, that means homes near St Michael's and All Angels Church, among other places. Further afield, we also cover the area around Sudeley Castle (4.2 miles west) and Moore Cottage Hospital (5.3 miles south-east). Open spaces near Barton include Shenberrow Hill.
Barton: your questions answered
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Which areas do you work in?
We work UK-wide, so Barton is covered. Our prices are the same everywhere.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
Materials we work on in Barton
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
