Hampshire · England
Bath re-enamelling & resurfacing in Gundleton, Hampshire
Problem with your bath in Gundleton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Bath re-enamelling in Gundleton without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you are dealing with a coloured bath you want in white and wear marks under the taps, we can help, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Gundleton (SO24)
- Region
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Aftercare is simple:
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Signs you need bath re-enamelling in Gundleton
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for these signs:
- A coating lifting around the plughole
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Questions to ask before booking
- Whether a trained technician does the job
- What preparation is included
- How your room will be protected
- How the colour is matched
Nearby places to Gundleton
Also in Gundleton
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
About Gundleton
Gundleton is about 7 miles south-west of Alton, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 683 places across Hampshire, from the larger towns to small villages. We work right across the region, from Gundleton to London (about 52 miles away).
We cover every part of SO24 and the streets around it. Whether you live on Goscombs Lane and Bighton Lane or a nearby road, a technician can come to you. Other places close to Gundleton include Bishop's Sutton (1 mile south-west), New Alresford (2 miles west), Bramdean (3 miles south), Hinton Ampner (4 miles south) and Cheriton (4 miles south-west). Larger places within reach include Basingstoke (12 miles north), Winchester (9 miles west), Eastleigh (13 miles south-west), Horndean (14 miles south), Chandler's Ford (14 miles south-west) and Alton (7 miles north-east).
What’s near Gundleton
Typical jobs here are in homes near Perins School, Church of All Saints and Three Horseshoes Public House and the streets around them. Further afield, we also cover the area around Barton Castle (2.9 miles north). Not far away are Shutts Copse and Red Hill.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Gundleton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Doing more than one item at once
- How easy the damage is to reach
- What kind of damage it is
- The material
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- One picture of the entire bath
- What it’s made of, if you know
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Honest limits
Some jobs are not right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
FAQs for Gundleton
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Gundleton?
Yes, we do. We send a technician to Gundleton for every job, with no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
