Lancashire · England
Bath Re-enamelling for Haighton Top homes
Bath re-enamelling in and around Haighton Top: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Haighton Top
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair basins & shower trays, acrylic baths and cast iron baths, and common reasons people get in touch are staining under the taps and around the waste and a peeling or bubbling previous coating.
All our work comes with our one-year guarantee, wherever you are in Lancashire.
- Location
- Haighton Top (PR2)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Haighton Top. What changes the price is:
- Any earlier repairs that need removing first
- How many areas need work
- Access to the area
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- The material, if you know it
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Nearby places to Haighton Top
What else we do in Haighton Top
Haighton Top: your questions answered
Do you work in Haighton Top?
We do. Technicians travel to Haighton Top from across the region, and the price is the same as everywhere else.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Covering Haighton Top
Haighton Top is about 2 miles north-east of Fulwood, in Lancashire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Haighton Top is one of 482 places in Lancashire where we work. We work right across the region, from Haighton Top to Manchester (29 miles away).
Every address in PR2 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Haighton Green Lane and Fernyhalgh Lane and the roads around them. If you’re just outside Haighton Top, we cover Haighton Green (1 mile east), Pudding Pie Nook (1 mile north-west), Goosnargh (1 mile north), Cumeragh Village (2 miles north-east) and Cow Hill (2 miles east). Further out, we also cover Preston (3 miles south), Chorley (11 miles south), Lytham St Anne's (14 miles west), Bamber Bridge (5 miles south), Accrington (13 miles east) and Leyland (8 miles south).
What’s near Haighton Top
Typical jobs here are in homes near Sherwood Primary School, St Mary's Church and Haighton Manor pub, among other places. For rail, the closest station is Preston station, about 3.5 miles south of the centre. Well-known places in the area include Royal Preston Hospital (1.5 miles south-west) and Preston Castle (3.4 miles south-west). Open spaces near Haighton Top include Grimsargh Wetlands.
Do you need bath re-enamelling in Haighton Top?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Stains that will not shift
What your quote should include
- How changes to the job are handled
- How long the guarantee is and what it covers
- Who turns up on the day
- What prep work is covered
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Landlord and trade work in Haighton Top
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Haighton Top, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Looking after it afterwards
To keep it looking its best for years:
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
The process
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Get a quote
Most customers in Haighton Top get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
