Wiltshire · England
Bath re-enamelling & resurfacing in Ham, Wiltshire
Full bath re-enamelling and resurfacing in Ham, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Ham
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include a coloured bath you want in white and stains that won’t shift, in cast iron baths, Victorian roll-tops and pressed steel baths.
All our work is covered by a one-year guarantee, wherever you are in Wiltshire.
- Where
- Ham (SN8)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
In fairness, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly.
Materials we work on in Ham
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What else we do in Ham
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Common problems we fix in Ham
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients usually contact us about:
- Thin, worn enamel in places
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Before booking anyone
- When it can be used again
- Whether they match the colour on site
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
Aftercare is simple:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Questions from Ham
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
About Ham
Ham is about 9 miles west of Newbury, in Wiltshire. Our repair technicians come to homes and businesses in Ham and the surrounding area, so there is no workshop to go to. We work in all 425 towns and villages in Wiltshire. We work right across the region, from Ham to London (62 miles away).
Our visits in SN8 work the same way as everywhere else we cover. Local streets include Church Road, Ham Road and Spray Road, all of which we cover. Close by, we cover Shalbourne (1 mile west), Rivar (1 mile south-west), Buttermere (1 mile south-east), Bagshot (1 mile north-west) and Little Bedwyn (3 miles north-west). We also work in nearby towns such as Marlborough (9 miles north-west), Bulford (15 miles south-west), Pewsey (10 miles west), Aldbourne (9 miles north-west), Burbage (6 miles west) and Ramsbury (6 miles north-west).
What’s near Ham
Typical jobs here are in homes near Crown and Anchor pub, Shalbourne CofE Primary School and Church of All Saints. The nearest railway station is Bedwyn station, about 3.2 miles west. Well-known places in the area include Bedwyn Stone Museum (3.4 miles west). Open spaces near Ham include Inkpen Hill and Kintbury Newt Ponds.
About our accreditations · Every repair comes with a one-year guarantee.
