West Sussex · England
Bath re-enamelling & resurfacing in Hambrook, West Sussex
Bath re-enamelling for Hambrook, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
Bath re-enamelling in Hambrook without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s worn patches where water runs and sits and several chips and rust patches, we can help.
All of our repairs are guaranteed for twelve months in Hambrook and everywhere else. We return to put right any problem with the work.
- Location
- Hambrook (PO18)
- County
- West Sussex
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition:
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Towns and villages near Hambrook
More services for Hambrook
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- The size and number of damaged areas
- Whether we combine several jobs
- The type of damage
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- Any details about the material
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Your questions about bath re-enamelling in Hambrook
What areas do you cover?
The whole UK, including all of West Sussex. Just include your postcode and we’ll offer you dates.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you work in Hambrook?
Yes, we do. Repair technicians travel to Hambrook from across the region, with no extra charge for travel.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your PO18 postcode.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What happens once I’ve sent photos?
You’ll get a fixed quote back, typically with dates to choose from. You’re under no obligation.
What we’re called out for in Hambrook
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
What your quote should include
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It generally takes the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
Get a quote
Upload a photo of the damage and one of the whole item, with your PO18 postcode, and we will come back with a fixed quote.
Related advice
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in West Sussex and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Hambrook as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What we can’t put right
Some jobs aren’t right for a repair, for example:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
Materials we work on in Hambrook
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Hambrook and the surrounding area
Hambrook is about 5 miles west of Chichester, in West Sussex. Across the PO18 area, we carry out the work at your property. Hambrook is one of 371 towns and villages in West Sussex where we work. You can also see our page for London, about 56 miles away.
We cover every part of the PO18 postcode area and the streets around it. Jobs here include addresses on Kingfisher Close, Dragonfly Grove and Pipistrelle Way. Close by, we cover Nutbourne (1 mile south), Funtington (1 mile north-east), West Ashling (1 mile east), Chidham (1 mile south) and Racton (2 miles north). Further out, we also cover Bognor Regis (10 miles south-east), Chichester (5 miles east), Selsey (9 miles south-east), Emsworth (3 miles west), Portfield (5 miles east) and Yapton (12 miles east).
Near you in Hambrook
We visit homes around St Wilfrid's Church and Hall, Chidham Parochial Primary School and Bourne Community College. Hambrook’s nearest station is Nutbourne station, roughly 0.6 miles south. Other landmarks nearby include Havant War Memorial Hospital (4.7 miles west) and Emsworth Museum (2.5 miles west). For a walk, there’s Nutborne Marshes and Stoke Down.
About our accreditations · Every repair comes with a one-year guarantee.
