Wiltshire · England
Bath Re-enamelling in Hankerton
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hankerton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Hankerton
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We’re often asked to fix several chips and rust patches and a bath in a colour that no longer suits, on basins & shower trays, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Hankerton (SN16)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Unusual colours or finishes
- The material and finish
- Doing more than one item at once
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- One picture of the entire bath
Email us pictures of the damage and one of the whole item, and tell us you’re in Hankerton, and we will reply with a fixed price.
Also near Hankerton
Also in Hankerton
What we’re called out for in Hankerton
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
You may need us if you’ve spotted any of these:
- Lots of chips and rust spots
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Comparing quotes
- Who turns up on the day
- The length of the guarantee and what it covers
- How long it needs to cure
- What prep work is covered
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Covering Hankerton
Hankerton is about 7 miles south-west of Cirencester, in Wiltshire. From the centre of Hankerton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Hankerton is one of 425 towns and villages in Wiltshire where we work. You can also see our page for Birmingham, about 59 miles away.
Our visits in SN16 work the same way as everywhere else we cover. From Church Lane, Hillwell and Follyfield or anywhere nearby, we can come to you. We also cover the places around Hankerton: Perry Green (1 mile south), Crudwell (2 miles north-west), Oaksey (2 miles north-east), Chelworth (2 miles north) and Kemble (4 miles north). Within a short drive, we also cover Chippenham (11 miles south), Calne (12 miles south), Corsham (14 miles south-west), Malmesbury (3 miles south-west), Hardenhuish (11 miles south) and Lyneham (8 miles south-east).
Around Hankerton
Locally, our jobs take us to homes close to Church of the Holy Cross. For rail, the closest station is Kemble station, about 4.3 miles north. Well-known places in the area include Tetbury Hospital (5 miles west) and Malmesbury Castle (3.2 miles south-west). Not far away are Clattinger Farm.
Keeping it looking good
So the finish stays in good condition:
- Respect the curing time we give you
- Fix dripping taps quickly
- Have chips seen to early
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Hankerton customers choose us
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- One price list for the whole UK
- A year’s guarantee on all work
Take a look at our full price list or bath cost comparison.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For landlords and businesses
We work for landlords, letting agents and housing providers in Hankerton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
FAQs for Hankerton
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Hankerton.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your SN16 postcode.
About our accreditations · Every repair comes with a one-year guarantee.
