Gloucestershire · England
Bath Re-enamelling for Rodmarton homes
Bath re-enamelling across Rodmarton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Rodmarton
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for a peeling or bubbling previous coating and brown or grey marks that don’t clean off, in cast iron baths, basins & shower trays and pressed steel baths.
All of our repairs are guaranteed for twelve months in Rodmarton and everywhere else. We return to put right any problem with the work.
- Where
- Rodmarton (GL7)
- Area hub
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
More services for Rodmarton
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we’re called out for in Rodmarton
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
Look out for any of the following:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Before you book anyone
- Whether the price is fixed and includes VAT
- What prep work is covered
- What protection goes down before work starts
- How the colour is matched
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Rodmarton: your questions answered
How much does bath re-enamelling cost in Rodmarton?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are there extra charges for Rodmarton?
No. Our quotes include travel, with the same prices everywhere we work.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Do you come to Rodmarton?
Yes. We cover the whole UK and come to Rodmarton. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. The main factors are:
- Access to the area
- How much damage there is
- The type of damage
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Make sure they show:
- One picture of the whole bath
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Natural light rather than flash
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Have a window or extractor fan available
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Where we work around Rodmarton
Rodmarton is about 5 miles south-west of Cirencester, in Gloucestershire. Our repair technicians come to customers in Rodmarton and the surrounding area, so nothing has to leave your home. Rodmarton is one of 470 places in Gloucestershire where we work. Our jobs stretch from Rodmarton to Birmingham (about 55 miles away).
Jobs in GL7 work the same way as everywhere else we cover. We also travel to Tarlton (1 mile north-east), Kemble (3 miles east), Chelworth (3 miles south-east), Crudwell (3 miles south) and Oaksey (4 miles south-east). We also work in nearby towns such as Cheltenham (15 miles north), Gloucester (13 miles north-west), Stroud (8 miles north-west), St Paul's (15 miles north), Cirencester (5 miles north-east) and Lansdown (15 miles north).
Landmarks near Rodmarton
Our customers here include homes close to Rodmarton School and Church of St Peter. Rodmarton’s nearest station is Kemble station, roughly 2.5 miles east of the centre. Nearby you’ll also find Tetbury Camp (4.6 miles south-west) and Tetbury Hospital (4.5 miles south-west). The countryside around Rodmarton includes Siccaridge Wood.
About our accreditations · Every repair comes with a one-year guarantee.
