East Sussex · England

Bath re-enamelling & resurfacing in Hankham, East Sussex

Fixed-price bath re-enamelling in Hankham and the surrounding area, generally in one visit.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Hankham

Bath re-enamelling in Hankham, done in place

Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s enamel that’s lost its shine and feels rough and thin, worn enamel in places, we can help, whatever the material.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Hankham (BN24)
County
East Sussex
Guarantee
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Questions from Hankham

Do you cover the entire of East Sussex?

We cover the entire UK, including Hankham and the rest of East Sussex. Send your postcode with your pictures and we will offer you dates.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you quote from pictures?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you need to take the bath out?

No. We resurface it in place, so the tiles and taps stay put.

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Do not leave a chip unrepaired
  • Store bottles off the bath
  • Fix dripping taps quickly
  • Respect the curing time we give you

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Acrylic that moves when you stand in it
  • A metal bath with a through crack
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops

Do you need bath re-enamelling in Hankham?

Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.

Most people get in touch when they notice something like this:

  • A period or roll-top bath worth keeping
  • Worn patches where water runs and sits
  • Lots of chips and rust spots
  • A coating lifting around the plughole

Before booking anyone

  • Who will actually do the work
  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • A fixed quote, and whether VAT is included

Our hiring checklist

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.

Where we work around Hankham

Hankham is about 3 miles north of Eastbourne, in East Sussex. Across the BN24 area, we come to you. Hankham is one of 289 towns and villages in East Sussex where we work. You can also see our page for London, about 50 miles away.

Here we cover the BN24 postcode area. From Hankham Road, Milton Street and Foords Lane or anywhere nearby, a technician can come to you. We also travel to Blackness (1 mile south-west), Stone Cross (1 mile south), Polegate (2 miles west), Lower Willingdon (2 miles south-west) and Willingdon (2 miles south-west). Within a short drive, we also cover Eastbourne (3 miles south), Hastings (12 miles east), Bexhill-on-Sea (8 miles east), Seaford (9 miles west), Lewes (13 miles west) and Hailsham (3 miles north-west).

Landmarks near Hankham

We visit homes around St Luke's Church, The Red Lion pub and Causeway School, among other places. The closest station to Hankham is Pevensey & Westham station, roughly 1.4 miles south-east of the centre. Nearby you’ll also find Eastbourne District General Hospital (2.9 miles south-west) and Pevensey Castle (1.7 miles east). Green spaces nearby include Combe Hill.

Map of Hankham © OpenStreetMap contributors

How it works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before we go, we’ll explain when it can be used and how to care for it.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Getting ready for the visit

  • Clear the area around the damage
  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing

Get a quote

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed quote

Read more

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Why repair rather than replace?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • Same prices wherever you are
  • Colour mixed on the day to match
  • Most jobs done in one visit

Read our full price list or bath cost comparison.

Prices and what affects them

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • The material and finish
  • Access to the area

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

We price nearly every job from pictures. This is what to send:

  • Natural light rather than flash
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale
  • Details of any past repairs

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.