Nottinghamshire · England
Bath re-enamelling & resurfacing in Harby, Nottinghamshire
Bath re-enamelling in Harby without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- A period or roll-top bath worth keeping
About our bath re-enamelling in Harby
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s an old resurfacing that’s failing and worn patches where water runs and sits, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Harby (NG23)
- Region
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Harby
We carry out planned and one-off repairs for housing associations and facilities teams in Nottinghamshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Harby, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What we are called out for in Harby
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
What your quote should include
- Aftercare advice
- What the guarantee covers, and for how long
- Whether the price covers travel
- How the room is protected while they work
Your questions about bath re-enamelling in Harby
Do you cover the whole of Nottinghamshire?
The entire UK, including all of Nottinghamshire. Just include your postcode and we will offer you dates.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
How it works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Harby, and we’ll come back with a fixed quote.
Advice
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Harby. What changes the price is:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material and finish
- What kind of damage it is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
You can normally get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- One picture of the whole bath
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Also in Harby
Looking after it afterwards
Nothing complicated is needed:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Repair dripping taps early
- Respect the curing time we give you
Dry the bath after use if possible, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Covering Harby
Harby is about 5 miles north-west of North Hykeham, in Nottinghamshire. Across the NG23 area, we come to you. Harby is one of 329 towns and villages in Nottinghamshire where we work. We work right across the region, from Harby to Leeds (54 miles away).
Postcode districts we cover here: NG23. Jobs here include addresses on Station Road, Church Road and Enfield Court. If you are just outside Harby, we cover Doddington (1 mile east), Drinsey Nook (2 miles north), Broadholme (2 miles north-east), Jerusalem (2 miles east) and Skellingthorpe (3 miles east). Within a short drive, we also cover Newark-on-Trent (12 miles south-west), Retford (13 miles north-west), Balderton (13 miles south), Southwell (15 miles south-west), New Ollerton (13 miles west) and Fernwood (13 miles south).
What’s near Harby
We visit homes around Queen Eleanor Primary School, The Bottle & Glass pub and All Saints' Church and the streets around them. Harby’s nearest station is Saxilby station, roughly 2.8 miles north. Nearby you’ll also find 50 and 61 Squadron Museum (3.5 miles east). For a walk, there is Tunman Wood.
About our accreditations · Every repair comes with a one-year guarantee.
