Birmingham · England
Bath re-enamelling & resurfacing in Hardwick, Birmingham
Bath re-enamelling for Hardwick, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Covering Hardwick
Hardwick is about 2 miles south-east of Aldridge, in Birmingham. Customers in Hardwick get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Hardwick is one of 140 towns and villages in Birmingham we cover. We work right across the region, from Hardwick to Birmingham (about 8 miles away).
Our visits in B74 and WS9 work the same way as everywhere else we cover. Jobs here include addresses on Coniston Road, Chester Road and Lindrosa Road. Other places close to Hardwick include Bourne Vale (1 mile west), Streetly (1 mile south), Little Aston (1 mile east), Hill Hook (2 miles east) and Mere Green (2 miles east). Within a short drive, we also cover Birmingham (8 miles south), Royal Sutton Coldfield (3 miles south-east), Erdington (5 miles south-east), Lee Bank (8 miles south), Cape Hill (8 miles south-west) and Paradise (8 miles south).
Around Hardwick
In Hardwick, that means homes near St Francis of Assisi Catholic Technology College, The Old Irish Harp Public House and Manor Primary School. The closest station to Hardwick is Blake Street station, about 2 miles north-east of the centre. Other landmarks nearby include Walsall Castle (4.8 miles west) and Good Hope Hospital (3.5 miles south-east). For a walk, there is Bourne Pool and Barr Beacon.
Bath re-enamelling in Hardwick without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. We are frequently asked to fix worn patches where water runs and sits and a roll-top that’s seen better days, across acrylic baths, Victorian roll-tops and basins & shower trays.
All our work comes with a one-year guarantee, wherever you are in Birmingham.
- Area
- Hardwick (B74, WS9)
- Area hub
- Birmingham
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The size and number of damaged areas
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- The postcode, so we can plan the visit
- Something in shot to show the size
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Common questions in Hardwick
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send pictures?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
When to call us in Hardwick
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Look out for any of the following:
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- Stains that will not shift
Comparing quotes
- Aftercare advice
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
- Who turns up on the day
Aftercare tips
How the surface is treated afterwards matters:
- Have chips seen to early
- Repair dripping taps early
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Point us to the nearest place to park
How to get a price
For a price in Hardwick, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Towns and villages near Hardwick
Also in Hardwick
Landlords, agents and businesses in Hardwick
We work for landlords, letting agents and housing providers in Hardwick as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
