Birmingham · England
Bath Re-enamelling for Tudor Hill homes
Problem with your bath in Tudor Hill? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Tudor Hill
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a bath that stays dull however much you clean it and staining under the taps and around the waste, across cast iron baths, basins & shower trays and pressed steel baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Tudor Hill (B73, B74, B72)
- Area hub
- Birmingham
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Tudor Hill
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What to look for in a quote
- Whether they match the colour on site
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Tudor Hill as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Tudor Hill: your questions answered
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you work in Tudor Hill?
Yes. We work across the UK and come to Tudor Hill and the rest of Birmingham. Send pictures and we will quote, or call 0345 017 0787.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Where we work around Tudor Hill
Tudor Hill is about 1 mile north-west of Royal Sutton Coldfield, in Birmingham. From the centre of Tudor Hill to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 140 towns and villages in Birmingham, from the larger towns to small villages. You can also see our page for Birmingham, about 7 miles away.
Our visits in B73, B74 and B72 work the same way as everywhere else we cover. You will find streets such as Park Road, Manor Road and Tudor Road. Main roads around Tudor Hill include the A5127, so getting to you is simple. We also cover the places around Tudor Hill: Doe Bank (1 mile north-east), Royal Sutton Coldfield (1 mile south-east), Maney (1 mile south), Driffold (1 mile south) and Mere Green (1 mile north). Within a short drive, we also cover Birmingham (7 miles south), Erdington (3 miles south), Lee Bank (7 miles south-west), Cape Hill (8 miles south-west), Paradise (7 miles south-west) and Chinese Quarter (7 miles south-west).
Landmarks near Tudor Hill
Locally, our jobs take us to homes close to The Royal Hotel, St Joseph's Catholic Primary School and Marsh Hill Boys School and the streets around them. Other local landmarks include Holy Trinity Church (0.6 miles south-east), Sutton Park (1 mile south-west) and Bishop Vesey's Grammar School (0.5 miles east). There is a railway station in Tudor Hill itself: Sutton Coldfield station. Further afield, we also cover the area around Kingstanding Shopping Centre (2.5 miles south-west) and Good Hope Hospital (0.8 miles east). The countryside around Tudor Hill includes Bourne Pool and Barr Beacon.
- Local facilities include Sutton New Hall (2.8 miles south-east)
Towns and villages near Tudor Hill
Other services in Tudor Hill
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How easy the damage is to reach
- What kind of damage it is
- Unusual colours or finishes
- Whether we combine several jobs
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A picture taken from further back
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Any details about the material
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
How the visit works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Point us to the nearest place to park
- Ensure the area is dry
- Tell us if there are stairs or a lift
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
