County Durham · England
Bath re-enamelling & resurfacing in Harelaw, County Durham
Our technicians come to Harelaw for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
Bath re-enamelling at your home in Harelaw
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with thin, worn enamel in places and several chips and rust patches, we can help.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Harelaw (DH9)
- Region
- County Durham
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Open a window if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Nearby places to Harelaw
What else we do in Harelaw
Signs you need bath re-enamelling in Harelaw
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
What to look for in a quote
- Whether the price covers travel
- How soon you can use it again
- How long the guarantee is and what it covers
- Who turns up on the day
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- The type of damage
- Whether old repairs or coatings need taking off
- The material and finish
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Most quotes are done from photos alone. To help us price it:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Any details about the material
- A wider photo showing the entire bath
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
For landlords and businesses
For anyone letting property in or around Harelaw, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Common questions in Harelaw
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do the materials smell?
Expect a mild smell while we are working.
What areas do you cover?
Everywhere in the UK, Harelaw included. There is no extra charge for travel.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Honest limits
A repair isn’t right for every job, including:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repair or replace in Harelaw?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Why choose Surface Doctor in Harelaw
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Work done at your home or business
- Honest advice, even when it means no job
See our pricing and resurfacing vs replacement cost guide.
Where we work around Harelaw
Harelaw is about 1 mile north-west of Annfield Plain, in County Durham. Customers in Harelaw get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Harelaw is one of 329 towns and villages in County Durham where we work. You can also see our page for Newcastle upon Tyne, about 9 miles away.
Here we cover the DH9 postcode area. Streets in the area include North Road, Fondlyset Lane and Greentree Lane, all of which we cover. Other places close to Harelaw include Catchgate (1 mile south), Annfield Plain (1 mile south-east), Dipton (1 mile north), Harperley (1 mile north-east) and East Kyo (1 mile east). We also work in nearby towns such as Durham (9 miles south-east), Consett (4 miles west), Bishop Auckland (15 miles south), Spennymoor (13 miles south-east), Chester-le-Street (7 miles east) and Crook (11 miles south).
Near you in Harelaw
Typical jobs here are in homes near Catchgate Primary School, Church of St Thomas and North Durham Academy. A little further out are Shotley Bridge Hospital (3.8 miles west) and Derwentside (0.5 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
