Central Bedfordshire · England
Bath re-enamelling & resurfacing in Harlington, Central Bedfordshire
Full bath re-enamelling and resurfacing for homes and businesses in Harlington and across Central Bedfordshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Harlington
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include worn patches where water runs and sits and a bath in a colour that no longer suits, on cast iron baths, acrylic baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Harlington (LU5)
- Region
- Central Bedfordshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Harlington, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
Once the work has cured, treat it gently:
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Harlington: your questions answered
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Are there extra charges for Harlington?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How much does bath re-enamelling cost in Harlington?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Covering Harlington
Harlington is about 3 miles south of Flitwick, in Central Bedfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Harlington is one of 121 places in Central Bedfordshire we cover. You can also see our page for London, about 36 miles away.
Here we cover the LU5 postcode area. You’ll find streets such as Church Road, Station Road and Tabor Close. Nearby, we also work in Westoning (1 mile north), Sharpenhoe (2 miles east), Upper Sundon (2 miles south), Lower Sundon (2 miles south) and Streatley (2 miles south-east). Within a short drive, we also cover Leighton Buzzard (8 miles south-west), Dunstable (6 miles south), Biggleswade (13 miles north-east), Houghton Regis (4 miles south), Flitwick (3 miles north) and Linslade (8 miles west).
Local landmarks in Harlington
Around Harlington, we work in homes near The Carpenters Arms, Harlington Lower School and Harlington Park and the streets around them. Also close by are Church of Saint Mary the Virgin (less than half a mile south-east) and Harlington Upper School (less than half a mile north-east). There’s a railway station in Harlington itself: Harlington station. A little further out are Keech Hospice Care (3.4 miles south-east) and Chalgrave Castle (2.7 miles south-west). For a walk, there is Fancott Woods and Meadows and Smithcombe Hill.
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Harlington. The price reflects:
- How many items we do on one visit
- What kind of damage it is
- Any earlier repairs that need removing first
- The colour and finish to match
The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.
Quotes from your photos
You can typically get a fixed quote without us visiting. To make it quick:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A wider photo showing the whole bath
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Also near Harlington
Also in Harlington
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Prices start from £350. We charge the same wherever you are, so there is no premium for Harlington. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- Fixed prices from your photos
Read our prices page or bath cost comparison.
When to call us in Harlington
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- Wear marks under the taps
- Chips and rust in more than one place
- Staining under the taps and around the waste
What to look for in a quote
- How soon you can use it again
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
