Oxfordshire · England
Bath Re-enamelling for Harpsden homes
Fixed-price bath re-enamelling in Harpsden and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Common questions in Harpsden
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Bath re-enamelling at your home in Harpsden
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. We are frequently asked to fix brown or grey marks that don’t clean off and a coating lifting around the plughole, in cast iron baths, pressed steel baths and basins & shower trays.
You get a one-year guarantee, the same in Harpsden as everywhere else we work.
- Where
- Harpsden (RG9)
- Area hub
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
Some jobs are not right for a repair, for example:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Keeping it looking good
Looking after the surface is easy:
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs right away
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Harpsden. What changes the price is:
- The type of damage
- The material
- Unusual colours or finishes
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- Where you are, by postcode
- A close-up of the damage, in focus
- Details of any past repairs
- A coin or ruler next to the damage for scale
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Signs you need bath re-enamelling in Harpsden
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
The things clients generally mention when they call include:
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Stains that will not shift
What to look for in a quote
- How your room will be protected
- How long the guarantee is and what it covers
- What aftercare is recommended
- What preparation is included
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlords, agents and businesses in Harpsden
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Let us know which floor the room is on
- Keep a parking space free if you can
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Places near Harpsden
More services for Harpsden
About Harpsden
Harpsden is about 4 miles north-east of Caversham, in Oxfordshire. Whether you’re in the middle of Harpsden or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 443 towns and villages in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Harpsden to London (35 miles away).
Our visits in RG9 are booked in the same way as anywhere else. We also cover the places around Harpsden: Harpsden Bottom (1 mile west), Henley-on-Thames (1 mile north), Shiplake Cross (1 mile south), Binfield Heath (2 miles south-west) and Lower Assendon (3 miles north). Larger places within reach include Benson (11 miles north-west), Chinnor (12 miles north), Tilehurst (7 miles south-west), Wallingford (11 miles north-west), Little Heath (8 miles south-west) and Oakley (12 miles north).
Local landmarks in Harpsden
Around Harpsden, we work in homes near The Jolly Waterman pub, Rupert House School and Trinity Church of England Primary School, among other places. Other local landmarks include Mill Meadows (0.8 miles north-east), Church of St Margaret (less than half a mile north-east) and Gillotts School (0.8 miles west). Harpsden’s nearest station is Henley-On-Thames station, roughly 0.9 miles north. Nearby you will also find Frazer Nash Archives (0.7 miles north-east) and Royal Berkshire Hospital (5.4 miles south-west). Green spaces nearby include Sonning Hill and Hurley Chalk Pit.
About our accreditations · Every repair comes with a one-year guarantee.
