Kent · England
Bath Re-enamelling in Harrietsham
Fixed-price bath re-enamelling in Harrietsham and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
What affects the price in Harrietsham
Resurfacing from £350. We do not charge extra for travel to Harrietsham. The price comes down to:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material
- How many areas need work
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
You can take the pictures on your phone. Just ensure we can see:
- Daylight if possible, and no flash reflection
- Any details about the material
- A clear, close picture of the problem area
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Bath re-enamelling in Harrietsham without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We work on pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and several chips and rust patches.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Harrietsham (ME17)
- County
- Kent
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Harrietsham
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What happens next?
We come back with a fixed price, plus dates. You are under no obligation.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How it works
We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Related advice
Keeping it looking good
So the finish stays in good condition:
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Honest limits
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Places near Harrietsham
What else we do in Harrietsham
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Do you need bath re-enamelling in Harrietsham?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people get in touch when they notice one of these:
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
- Stains that will not shift
- Lots of chips and rust spots
What your quote should include
- Aftercare advice
- What preparation is included
- How changes to the job are handled
- How soon you can use it again
Covering Harrietsham
Harrietsham is about 7 miles east of Maidstone, in Kent. Clients in Harrietsham get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Harrietsham is one of 922 towns and villages in Kent where we work. Our jobs stretch from Harrietsham to London (about 38 miles away).
Here we cover the ME17 postcode area. Whether you live on Church Road, Station Road and Norris Walk or anywhere nearby, a technician can come to you. If you are just outside Harrietsham, we cover Marley (1 mile east), Pollhill (1 mile west), Chegworth (1 mile west), Sandway (1 mile south-east) and Platt's Heath (1 mile south). Further out, we also cover Maidstone (7 miles west), Ashford (11 miles south-east), Sittingbourne (7 miles north), Faversham (10 miles north-east), Minster (13 miles north-east) and Kings Hill (12 miles west).
Landmarks near Harrietsham
In Harrietsham, that means homes near The Roebuck Public House, Catholic Church of the Good Shepherd and Kiln Wood. Also close by are The Lenham School (1.4 miles east) and Harrietsham Church of England Primary School (0.5 miles west). Harrietsham has its own railway station: Harrietsham station. Further afield, we also cover the area around The Dog Collar Museum (2.1 miles west) and Leeds Castle (2.2 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
