Nottinghamshire · England
Bath re-enamelling & resurfacing in Haywood Oaks, Nottinghamshire
Problem with your bath in Haywood Oaks? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Wear marks under the taps
Haywood Oaks: your questions answered
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Which areas do you work in?
All of Nottinghamshire, and the rest of the UK. There’s no extra charge for travel.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we’ll quote them together.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one.
Bath re-enamelling in Haywood Oaks without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for staining under the taps and around the waste and a coating lifting around the plughole, in basins & shower trays, acrylic baths and pressed steel baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Haywood Oaks (NG21)
- County
- Nottinghamshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What we cannot put right
We will always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Getting a price
Upload a photo of the damage and one of the entire item, with your NG21 postcode, and we will reply with a fixed quote.
Read more
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Get any chip repaired quickly
- Store bottles off the bath
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Haywood Oaks and the surrounding area
Haywood Oaks is about 5 miles south-east of Forest Town, in Nottinghamshire. Across the NG21 area, we come to you. Haywood Oaks is one of 329 towns and villages in Nottinghamshire we cover. We work right across the region, from Haywood Oaks to Manchester (53 miles away).
Postcode districts we cover here: NG21. Close by, we cover Blidworth Bottoms (1 mile west), Blidworth (1 mile north-west), Ravenshead (3 miles west), Papplewick (4 miles south-west) and Bestwood St Albans (5 miles south-west). Within a short drive, we also cover Mansfield (5 miles north-west), Beeston (13 miles south-west), Carlton (8 miles south), Sutton in Ashfield (7 miles west), Hucknall (6 miles south-west) and Newark-on-Trent (12 miles east).
What’s near Haywood Oaks
Our clients here include homes close to St Andrew's Mission Hall, The Joseph Whitaker School and Blidworth Oaks Primary School and the streets around them. Other landmarks nearby include Papplewick Pumping Station (2.2 miles south-west).
What affects the price in Haywood Oaks
Resurfacing from £350. We charge the same across the UK, including Haywood Oaks. The price reflects:
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The type of damage
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
When to call us in Haywood Oaks
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients typically mention when they call are:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
What your quote should include
- What prep work is covered
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- What happens if they find more damage
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- No extra charge for your area
- A fixed quote before booking
- Generally one visit, start to finish
- Colour-matched on site
See our pricing or guide to resurfacing and replacement costs.
Nearby places to Haywood Oaks
Other services in Haywood Oaks
About our accreditations · Every repair comes with a one-year guarantee.
