Suffolk · England
Bath Re-enamelling for Hedenham homes
Problem with your bath in Hedenham? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- One visit for most repairs
- A fixed quote before booking
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
Take a look at our pricing or guide to resurfacing and replacement costs.
About our bath re-enamelling in Hedenham
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on cast iron baths, acrylic baths and basins & shower trays, and common reasons people get in touch are staining under the taps and around the waste and a peeling or bubbling previous coating.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Hedenham (NR35)
- Area hub
- Suffolk
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Hedenham
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
People usually call us after spotting something like this:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- Stains that will not shift
What your quote should include
- What aftercare is recommended
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Whether they match the colour on site
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Aftercare tips
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Hedenham: your questions answered
How do I get a price for bath re-enamelling in Hedenham?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Towns and villages near Hedenham
Also in Hedenham
Our work in Hedenham
Hedenham is about 12 miles south-east of Norwich, in Suffolk. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 731 places in Suffolk, from the larger towns to small villages.
Our repair technicians cover all of NR35 and the streets around it. Streets in the area include Church Road, Norwich Road and Earsham Road, all of which we cover. Other places close to Hedenham include Ditchingham (2 miles south-east), Earsham (2 miles south), Broome (2 miles east), Broome Street (3 miles east) and Bungay (3 miles south-east). We also work in nearby towns such as Lowestoft (14 miles east), Beccles (7 miles east), Diss (14 miles south-west), Halesworth (11 miles south-east), Carlton Colville (12 miles east) and Kirkley (14 miles east).
Around Hedenham
Around Hedenham, we work in homes near Church of St Peter and Bath Hills and the streets around them. A little further out are Bungay Museum (2.3 miles south-east) and Bungay Castle (2.4 miles south-east). Green spaces nearby include Homersfield Lake.
How it works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. It normally takes the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
What affects the price in Hedenham
Resurfacing from £350. There is no charge for travel to Hedenham. The price depends on:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Send us photos of the damage and a wider shot of the entire item, with your NR35 postcode, and we’ll come back with a fixed quote.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
When a repair isn’t the answer
We won’t take on work that will not last, so these are the limits:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
