Conwy · Wales
Bath re-enamelling & resurfacing in Hendre, Conwy
Bath re-enamelling for Hendre, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A coating lifting around the plughole
When a repair is not the answer
A repair is not right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
- A bath that’s rusted through
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Bath re-enamelling at your home in Hendre
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re often asked to fix an original cast iron bath that needs restoring and thin, worn enamel in places, on Victorian roll-tops, pressed steel baths and acrylic baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Hendre (LL32)
- Region
- Conwy
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Hendre
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Hendre
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Normally one visit, start to finish
Take a look at our prices page and bath cost comparison.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
FAQs for Hendre
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How do I get a price for bath re-enamelling in Hendre?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item with your LL32 postcode.
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Make sure the room can be ventilated
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Advice
When to call us in Hendre
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we’re asked about most:
- An outdated colour you’d like to change
- Several chips and rust patches
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
Comparing quotes
- How the colour is matched
- What aftercare is recommended
- How soon you can use it again
- What prep work is covered
Also near Hendre
Other services in Hendre
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Hendre and nearby
Hendre is about 3 miles south of Llandudno, in Conwy. Wherever you are in the LL32 postcode area, we carry out the work at your property. We work in 75 places across Conwy. Our nearest city page is Liverpool, about 39 miles away.
Jobs in LL32 are booked in the same way as anywhere else. Neighbouring places we cover include Groesffordd (1 mile south-west), Gyffin (1 mile north-east), Cadnant Park (1 mile north), Henryd (1 mile south) and Conwy (1 mile north-east). Larger places within reach include Bae Colwyn (5 miles east), Llandudno (3 miles north), Old Colwyn (6 miles east), Colwyn Bay (6 miles east), Abergele (11 miles east) and Colwyn Bay (5 miles east).
What’s near Hendre
Typical jobs here are in homes near Albion Ale House, Ysgol Aberconwy and Ysgol Aberconwy and the streets around them. The nearest railway station is Conwy station, about 0.8 miles north-east. Well-known places in the area include Conwy Castle (0.9 miles north-east) and Conwy Hospital (1 mile north). For a walk, there is Bodlondeb Woods and Llyn Pen Ffridd Newydd.
- Other local spots include Marl (1.8 miles north-east)
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Repair dripping taps early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Landlord and trade work in Hendre
We carry out planned and one-off repairs for housing associations and facilities teams in Conwy and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
