Conwy · Wales
Bath Re-enamelling for Henryd homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Henryd. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
Bath re-enamelling at your home in Henryd
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people contact us are enamel that’s lost its shine and feels rough and chips and rust in more than one place.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Henryd (LL32)
- Area hub
- Conwy
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Places near Henryd
What else we do in Henryd
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Do you need bath re-enamelling in Henryd?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
People generally call us after spotting something like this:
- Stains that will not shift
- Several chips and rust patches
- A roll-top that is seen better days
- An outdated colour you’d like to change
What to look for in a quote
- Aftercare advice
- What the guarantee covers, and for how long
- What happens if they find more damage
- How long it needs to cure
Common questions in Henryd
Can you quote from pictures?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first, so let us know about it.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Repair or replace in Henryd?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Henryd. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Henryd customers choose us
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Usually one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Henryd
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Henryd use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Henryd and nearby
Henryd is about 4 miles south of Llandudno, in Conwy. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 75 towns and villages across Conwy, from the larger towns to small villages. You can also see our page for Liverpool, about 39 miles away.
Here we cover the LL32 postcode area. From Maes Baclaw and Erw Fawr or anywhere nearby, a technician can come to you. Other places close to Henryd include Groesffordd (1 mile north-west), Hendre (1 mile north), Gyffin (1 mile north), Cadnant Park (2 miles north) and Ty'n-y-groes (2 miles south). Further out, we also cover Bae Colwyn (5 miles north-east), Llandudno (4 miles north), Old Colwyn (6 miles north-east), Colwyn Bay (6 miles east), Abergele (10 miles east) and Colwyn Bay (5 miles north-east).
Around Henryd
Around Henryd, we work in homes near Llangelynin New Church, The Groes Inn and Ysgol Aberconwy and the streets around them. The nearest railway station is Conwy station, about 1.6 miles north of the centre. Well-known places in the area include Toll House (1.7 miles north) and Conwy Castle (1.7 miles north). For a walk, there is Llyn Pen Ffridd Newydd and Gorse Hill.
- Local facilities include Marl (2.5 miles north-east)
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Tell us about parking, stairs or access
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
Ask for a price
Most clients in Henryd get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We take into account:
- The material
- Unusual colours or finishes
- The size and number of damaged areas
- Doing more than one item at once
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- A photo taken from further back
- Natural light rather than flash
- One sharp close-up of the damage
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
