South Gloucestershire · England
Bath re-enamelling & resurfacing in Henfield, South Gloucestershire
Full bath re-enamelling and resurfacing for homes and businesses in Henfield and across South Gloucestershire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Our work in Henfield
Henfield is about 2 miles north-east of Mangotsfield, in South Gloucestershire. From the centre of Henfield to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Henfield is one of 110 towns and villages in South Gloucestershire where we work. You can also see our page for Birmingham, about 71 miles away.
Every address in BS36 is within our area. From Bitterwell Close and Henfield Road or anywhere nearby, we can come to you. We also travel to Ram Hill (1 mile north), Kendleshire (1 mile west), Coalpit Heath (1 mile north), Westerleigh (1 mile east) and Frampton Cotterell (1 mile north-west). Within a short drive, we also cover Kingswood (4 miles south), Yate (3 miles north-east), Fishponds (4 miles south-west), Bradley Stoke (4 miles west), Thornbury (7 miles north) and Patchway (5 miles west).
What’s near Henfield
We visit homes around Church of St Saviour, The Manor Coalpit Heath Church of England Primary School and Downend School and the streets around them. Henfield’s nearest station is Yate station, about 2.4 miles north-east. Other landmarks nearby include Dodington Carriage Museum (3 miles east) and Frenchay Hospital (2.8 miles west). Green spaces nearby include Lodge Hill.
Bath re-enamelling at your home in Henfield
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. We’re frequently asked to fix stains that won’t shift and chips and rust in more than one place, in pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair comes with a one-year guarantee.
- Where
- Henfield (BS36)
- County
- South Gloucestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Henfield
Also in Henfield
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
What you get with us
- Most jobs done in one visit
- Colour mixed on the day to match
- No need to remove anything
- Fixed prices from your photos
Take a look at our pricing and guide to resurfacing and replacement costs.
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know if it has been repaired before
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
What affects the price in Henfield
Resurfacing from £350. There’s no area surcharge for Henfield. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- What the surface is made of
- Whether we combine several jobs
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- What it’s made of, if you know
- A close-up of the damage, in focus
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Signs you need bath re-enamelling in Henfield
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for these signs:
- Wear marks under the taps
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Questions to ask before you book
- How the colour is matched
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Henfield: your questions answered
How long will the bath be out of use?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Honest limits
It helps to know what we can’t do too:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
