South Gloucestershire · England
Bath Re-enamelling for Ram Hill homes
Local bath re-enamelling for Ram Hill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
How we handle bath re-enamelling in Ram Hill
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people get in touch are thin, worn enamel in places and enamel that’s lost its shine and feels rough.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Ram Hill (BS36)
- Area hub
- South Gloucestershire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Ram Hill
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
You may need us if you’ve spotted any of these:
- A roll-top that is seen better days
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Thin, worn enamel in places
Comparing quotes
- The length of the guarantee and what it covers
- How changes to the job are handled
- Aftercare advice
- What preparation is included
Nearby places to Ram Hill
More services for Ram Hill
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day in most cases. We leave the room clean.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Ram Hill. The price depends on:
- Whether we combine several jobs
- The material
- What kind of damage it is
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Ram Hill. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- Any earlier repairs or coatings
- A photo taken from further back
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
FAQs for Ram Hill
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Same prices wherever you are
Take a look at our prices page or bath cost comparison.
About Ram Hill
Ram Hill is about 2 miles north-east of Mangotsfield, in South Gloucestershire. Across the BS36 area, we come to you. We cover 110 places across South Gloucestershire, from the larger towns to small villages. Our jobs stretch from Ram Hill to Birmingham (about 70 miles away).
Postcode districts we cover here: BS36. Whether you live on Broad Lane and Ram Hill or anywhere nearby, a technician can come to you. We also cover the places around Ram Hill: Henfield (1 mile south), Coalpit Heath (1 mile north-west), Kendleshire (1 mile west), Westerleigh (1 mile east) and Frampton Cotterell (1 mile north-west). We also work in nearby towns such as Kingswood (5 miles south), Yate (3 miles north-east), Fishponds (4 miles south-west), Bradley Stoke (4 miles west), Thornbury (7 miles north) and Patchway (5 miles west).
Around Ram Hill
Locally, our jobs take us to homes close to Winterbourne Academy, Church of St Saviour and The Manor Coalpit Heath Church of England Primary School, among other places. For rail, the closest station is Yate station, roughly 1.9 miles north-east. Further afield, we also cover the area around Frenchay Hospital (3.2 miles south-west) and Dodington Carriage Museum (2.8 miles east). The countryside around Ram Hill includes Lodge Hill.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A bath split right through the body
Send us photos and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in South Gloucestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Ram Hill, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
