West Sussex · England
Bath re-enamelling & resurfacing in Henfield, West Sussex
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Henfield. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
About our bath re-enamelling in Henfield
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with worn patches where water runs and sits and chips and rust in more than one place, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Henfield (BN5)
- County
- West Sussex
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Henfield
We work for landlords, letting agents and housing providers in Henfield as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Nearby places to Henfield
What else we do in Henfield
Prices and what affects them
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- How much damage there is
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Something in shot to show the size
- One picture of the whole bath
For a price in Henfield, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Ask for a price
Most clients in Henfield get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Signs you need bath re-enamelling in Henfield
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
What to look for in a quote
- What preparation is included
- How the colour is matched
- How to care for the finish
- Whether a trained technician does the job
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Henfield: your questions answered
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Are there extra charges for Henfield?
No. Our quotes include travel, and we charge the same wherever you are.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Which areas do you work in?
We cover the whole UK, including Henfield and the rest of West Sussex. Just include your postcode and we will offer you dates.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What information do you need?
Use the quote form or ring 0345 017 0787.
How do I get a price for bath re-enamelling in Henfield?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Henfield and the surrounding area
Henfield is about 7 miles north of Shoreham-by-Sea, in West Sussex. We travel to homes and businesses in Henfield and nearby villages, so there is no workshop to go to. Henfield is one of 371 places in West Sussex we cover. You can also see our page for London, about 40 miles away.
Our visits in BN5 work the same way as everywhere else we cover. From Upper Station Road, High Street and Lower Station Road or anywhere nearby, a technician can come to you. We also cover the places around Henfield: Woodmancote (2 miles south-east), Blackstone (2 miles east), Small Dole (2 miles south), Shermanbury (2 miles north) and High Cross (3 miles east). Further out, we also cover Crawley (13 miles north), Horsham (9 miles north), Worthing (9 miles south-west), Haywards Heath (9 miles north-east), Burgess Hill (7 miles east) and Littlehampton (14 miles south-west).
Landmarks near Henfield
Our customers here include homes close to St Peter's Church, The Bell Inn and St Peter's CofE Primary School, among other places. Further afield, we also cover the area around The Dene Hospital (5.4 miles north-east) and Steyning Museum (3.7 miles south-west). The countryside around Henfield includes Woods Mill and Truleigh Hill.
About our accreditations · Every repair comes with a one-year guarantee.
