Denbighshire · Wales
Bath re-enamelling & resurfacing in Henllan, Denbighshire
Full bath re-enamelling and resurfacing at your home in Henllan, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
About our bath re-enamelling in Henllan
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with a coating lifting around the plughole and chips and rust in more than one place, we can help, on basins & shower trays, acrylic baths and cast iron baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Henllan (LL16)
- Region
- Denbighshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Your questions about bath re-enamelling in Henllan
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The size and number of damaged areas
- Doing more than one item at once
- Access to the area
- What the surface is made of
We charge the same wherever you are, with no extra for Henllan. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
Getting a price
Send us a photo of the damage and a wider shot of the whole item, with your LL16 postcode, and we’ll reply with a fixed price.
Advice
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Do you need bath re-enamelling in Henllan?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Clients typically contact us about:
- Several chips and rust patches
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
What your quote should include
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Who turns up on the day
- Whether cleaning and preparation are in the price
Towns and villages near Henllan
Other services in Henllan
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
About Henllan
Henllan is about 8 miles south of Rhyl, in Denbighshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Henllan is one of 81 places in Denbighshire we cover. Our jobs stretch from Henllan to Liverpool (26 miles away).
Jobs in LL16 are booked in the same way as anywhere else. You’ll find streets such as Bryntirion, School Street and Godre'r Garn. Henllan sits on or near the B5428, which makes travel easy. We also cover the places around Henllan: Trefnant (2 miles north-east), Nant-y-Patrick (2 miles north-east), St Asaph (4 miles north), Cwm (6 miles north) and Rhuddlan (6 miles north). Further out, we also cover Rhyl (8 miles north), Prestatyn (9 miles north), Ruthin (9 miles south-east), Kinmel Bay (8 miles north), Y Ffrith (9 miles north) and Dyserth (7 miles north).
Local landmarks in Henllan
Around Henllan, we work in homes near St Sadwrn's Church and Llindir Inn, among other places. Further afield, we also cover the area around Denbigh Old Castle (2.1 miles south-east) and Wireless in Wales Museum (2.1 miles south-east). Open spaces near Henllan include Crest Mawr.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Henllan, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
